[Simh] Cluster communications errors
Dave Wade
dave.g4ugm at gmail.com
Wed Jul 18 13:14:17 EDT 2018
Hunter,
Is it set to Autosense Speed and Duplex? Is it getting confused? Can it be set to a fixed speed.
Dave
From: Simh <simh-bounces at trailing-edge.com> On Behalf Of Hunter Goatley
Sent: 18 July 2018 16:58
To: Simh <simh at trailing-edge.com>
Subject: Re: [Simh] Cluster communications errors
My mistake. I'm not running V4.0, I'm running V3.10-0 RC1.
After posting, it dawned on me that I should have tried SIMH V3.9.0, but it fails to boot:
(BOOT/R5:0 DUA0
2..
-DUA0
1..0..
HALT instruction, PC: 00004C02 (HALT)
sim>
I'm not sure why. I'm using the KA655x.bin that came with V3.9.0 and a new nvram.bin file, but everything else is the same as the V3.10-0 RC1 instance.
I just downloaded the current GitHub sources and compiled them ( <https://github.com/simh/simh/commit/15fd71b97c8aaec29dc1bbbd3473c3f0d582c9ff> 15fd71b). It boots, but I see the same behavior of losing connection to the cluster.
I also should have mentioned that this dedicated Ethernet card is plugged into the same switch as all of the other cluster members, so that shouldn't be an issue.
Thanks.
Hunter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20180718/b03a3da2/attachment.html>
More information about the Simh
mailing list