[Simh] vax simh and loading file

[Wilm Boerhout]

What error? What versipn of simh?

Op ma 15 feb. 2016 om 20:53 schreef Bill Cunningham <billcun at suddenlink.net>

>
>
> ----- Original Message -----
> *From:* Wilm Boerhout <wboerhout at gmail.com>
> *To:* simh at trailing-edge.com
> *Sent:* Monday, February 15, 2016 3:42 AM
> *Subject:* Re: [Simh] vax simh and loading file
>
> Exactly. The only thing that simh adds to this process is the "set cr
> reset" command to prompt the card reader (driver?).
>
> So on simh, the flow control would be:
>
>  1. get your "card deck" in a file on the host
>  2. boot simh with the cr device attached to said file
>  3. boot your VAX
>  4. log in, then CTRL/E out to the simh prompt, and issue "set cr reset"
>  5. issue "continue" to the simh prompt to resume the VAX
>  6. observe that your job has run, and the file (if not deleted, which
>     is the default) is now a DCL file in your default login directory,
>     default name is "INPBATCH.COM". Name may be overridden by the /NAME
>     qualifier on the job card.
>
> /Wilm
>
>
> OK here's what I tried. Issuing "continue" in simg doesn't work. simh>
> "continue" just gives an error.
>
> ./vax
> lo -r ka655x.bin
> set cpu 64m
> set cpu idle=vms
> set rq0 ra92
> at rq0 vms
> at nvr r
> set cr autoeof
> at -a cr list "name of licnese PAKs
> set cr translation=029
> b cpu
> Then I use "b dua0" no problems
> login as system and enter password. No problems
> ^E
> simh>
> here I enter "set cr reset"
> and at simh>
> I enter "continue" and get an error. <shrug>
>
> Bill
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20160215/335f58ba/attachment.html>