[Simh] vax simh and loading file

[Timothe Litt]

you have to start a queue or manually run inpsmb


On 15-Feb-16 14:53, Bill Cunningham wrote:
>  
>
>     ----- Original Message -----
>     *From:* Wilm Boerhout <mailto:wboerhout at gmail.com>
>     *To:* simh at trailing-edge.com <mailto:simh at trailing-edge.com>
>     *Sent:* Monday, February 15, 2016 3:42 AM
>     *Subject:* Re: [Simh] vax simh and loading file
>
>     Exactly. The only thing that simh adds to this process is the "set cr
>     reset" command to prompt the card reader (driver?).
>
>     So on simh, the flow control would be:
>
>      1. get your "card deck" in a file on the host
>      2. boot simh with the cr device attached to said file
>      3. boot your VAX
>      4. log in, then CTRL/E out to the simh prompt, and issue "set cr
>     reset"
>      5. issue "continue" to the simh prompt to resume the VAX
>      6. observe that your job has run, and the file (if not deleted, which
>         is the default) is now a DCL file in your default login directory,
>         default name is "INPBATCH.COM". Name may be overridden by the
>     /NAME
>         qualifier on the job card.
>
>     /Wilm
>
>
>     OK here's what I tried. Issuing "continue" in simg doesn't work.
>     simh> "continue" just gives an error.
>      
>     ./vax
>     lo -r ka655x.bin
>     set cpu 64m
>     set cpu idle=vms
>     set rq0 ra92
>     at rq0 vms
>     at nvr r
>     set cr autoeof
>     at -a cr list "name of licnese PAKs
>     set cr translation=029
>     b cpu
>     Then I use "b dua0" no problems
>     login as system and enter password. No problems
>     ^E
>     simh>
>     here I enter "set cr reset"
>     and at simh>
>     I enter "continue" and get an error. <shrug>
>      
>     Bill
>      
>
>
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20160215/79c1f294/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4994 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20160215/79c1f294/attachment.bin>