[Simh] Ultrix 1.0

Fri Jun 27 16:16:19 EDT 2014

Henry,
I tried to reproduce your installation using your instructions, but I failed:

sim> b rq1
Loading boot code from ka610.bin
 2..1..0.
Boot
: ra(1,0)vmunix
186016+46652+44656 start 0x10bc
Ultrix-32m V1.0 System #1: Fri Aug 17 11:57:07 EDT 1984
real mem  = 4190208
avail mem = 3374080
using 110 buffers containing 418816 bytes of memory
MicroVAX 1, microcode level = 5
Q22 bus
rqd0 at bus0 csr 172150 vec 774, ipl 17
ra0 at rqd0 slave 0
ra1 at rqd0 slave 1
ra2 at rqd0 slave 2
dz0 at bus0 csr 160100 vec 300, ipl 17
dz1 at bus0 csr 160110 vec 310, ipl 17
trap type 9, code = 800a755c, pc = 80014ba7
panic: Protection fault
syncing disks... done
dumping to dev 901, offset 0
dump succeededLoading boot code from ka610.bin
Rebooting...
 2..1..0.
Boot
: ra(1,0)vmunix

Could you please give me your ini file just in case I missed something there?

Thanks!

P.S.
Your RD52 Image runs fine.
I have a real MicroVAX I, but unfortunately no RD52 :-((
By the way - I'm from Germany, too ...

---
Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen