[Simh] Ultrix 1.0

[Henry Bent]

I don't have an ini file, I just save the state when I'm done and restore
it the next time.  I'm using the latest version from git, if that matters:

MicroVAX I (KA610) simulator V4.0-0 Beta        git commit id: f961a98b

I disabled everything I didn't need.  So I guess an ini file would be
something along the lines of:
set cpu idle=ultrixold
set tti 7b
set tto 7b
set cr disabled
set lpt disabled
set rl disabled
set rq0 rd52
set rq1 rx50
set rq2 rx50
set rq3 disabled
set ts disabled
set tq disabled
set xq type=deqna

-Henry




On 27 June 2014 16:16, Hans-Ulrich Hölscher <hoelscher-kirchbrak at freenet.de>
wrote:

> Henry,
> I tried to reproduce your installation using your instructions, but I
> failed:
>
> sim> b rq1
> Loading boot code from ka610.bin
>  2..1..0.
> Boot
> : ra(1,0)vmunix
> 186016+46652+44656 start 0x10bc
> Ultrix-32m V1.0 System #1: Fri Aug 17 11:57:07 EDT 1984
> real mem  = 4190208
> avail mem = 3374080
> using 110 buffers containing 418816 bytes of memory
> MicroVAX 1, microcode level = 5
> Q22 bus
> rqd0 at bus0 csr 172150 vec 774, ipl 17
> ra0 at rqd0 slave 0
> ra1 at rqd0 slave 1
> ra2 at rqd0 slave 2
> dz0 at bus0 csr 160100 vec 300, ipl 17
> dz1 at bus0 csr 160110 vec 310, ipl 17
> trap type 9, code = 800a755c, pc = 80014ba7
> panic: Protection fault
> syncing disks... done
> dumping to dev 901, offset 0
> dump succeededLoading boot code from ka610.bin
> Rebooting...
>  2..1..0.
> Boot
> : ra(1,0)vmunix
>
> Could you please give me your ini file just in case I missed something
> there?
>
> Thanks!
>
> P.S.
> Your RD52 Image runs fine.
> I have a real MicroVAX I, but unfortunately no RD52 :-((
> By the way - I'm from Germany, too ...
>
>
>
>
> ---
> Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen!
> http://email.freenet.de/basic/Informationen
>
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20140627/9bedf1c7/attachment-0002.html>