[Simh] vt220 to an emulated VAX
Robert G. Schaffrath
robert at schaffrath.net
Fri Nov 9 13:15:09 EST 2007
There is one other way to do it that I have had success with using a
REAL VT320. Get a copy of TcpToSer at http://www.tcptoser.de/ . First
make sure you can Telnet in to your simulated VAX. Then configure the
various TCP/IP settings in TcpToSer to connect to your VAX and you are
good to go.
Robert G. Schaffrath
VMS V3.7 -> VMS V7.2-2
Kevin Handy wrote:
> Villy Madsen wrote:
>
>> You could always re-write one of the pdp11/vax serial port drivers to work with
>> his serial port ...
>>
>>
> Or, you could log into Linux on the 220, then
> start up the emulator from there
> and use it as the console port.
>
> Or, log into Linux from the 220, then telnet into
> the emulator.
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20071109/937973d4/attachment-0003.html>
More information about the Simh
mailing list