<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
There is one other way to do it that I have had success with using a
REAL VT320. Get a copy of TcpToSer at <a class="moz-txt-link-freetext" href="http://www.tcptoser.de/">http://www.tcptoser.de/</a> . First
make sure you can Telnet in to your simulated VAX. Then configure the
various TCP/IP settings in TcpToSer to connect to your VAX and you are
good to go.<br>
<br>
Robert G. Schaffrath<br>
VMS V3.7 -> VMS V7.2-2<br>
<br>
Kevin Handy wrote:
<blockquote cite="mid:47349E43.5060601@srv.net" type="cite">
<pre wrap="">Villy Madsen wrote:
</pre>
<blockquote type="cite">
<pre wrap="">You could always re-write one of the pdp11/vax serial port drivers to work with
his serial port ...
</pre>
</blockquote>
<pre wrap=""><!---->Or, you could log into Linux on the 220, then
start up the emulator from there
and use it as the console port.
Or, log into Linux from the 220, then telnet into
the emulator.
_______________________________________________
Simh mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Simh@trailing-edge.com">Simh@trailing-edge.com</a>
<a class="moz-txt-link-freetext" href="http://mailman.trailing-edge.com/mailman/listinfo/simh">http://mailman.trailing-edge.com/mailman/listinfo/simh</a>
</pre>
</blockquote>
</body>
</html>