[Simh] dec windows with simh

[Supratim Sanyal]

On 7/26/2019 02:53, gérard Calliet wrote:
> Hello,
>
> I have used for a long time the simh emulation of microvax 3900. I 
> need now to install and run DEC Windows on it.
>
> Do you think it is possible? And is there a better simh VAX model for 
> that?

The microvax2 emulator works fine with DECwindows for me. Here is my 
.ini if its of any help.

set cpu 16m
set qvss capture
set cpu model=vaxstationgpx
set cpu idle=vms
load -r ../data/ka630.bin ; Modified firmware to emulate a MicroVAX II.
attach nvr ../data/microvax2.nvram
set xq enable
set xq mac=BB-30-80-DA-08-69
attach xq vde:/tmp/vde-ip.ctl
set xqb enable
set xqb mac=AA-00-04-00-1E-7C
attach xqb vde:/tmp/vde-dnet.ctl
set rq enable
set rq0 ra92
attach rq0 ../data/vaxstationII.ra92-1.5gb.disk0.dsk
set rq1 ra92
attach rq1 ../data/vaxstationII.ra92-1.5gb.disk1.dsk
set rq2 cdrom
attach -r rq2 ../data/declogo.iso
set rq3 cdrom
set tq enable
attach tq0 ../data/tape.tap
set tq1 disable
set tq2 disable
set tq3 disable
set dz lines=4
set rl disable
set ts disable
set cpu conhalt
show version
show ether
set cpu autoboot
dep bdr 0
boot cpu
exit

regards,

Supratim




>
> Thanks,
>
> Gérard Calliet
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh


-- 
Supratim Sanyal, W1XMT
39.19151 N, 77.23432 W
QCOCAL::SANYAL via HECnet

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20190726/4f7e1b89/attachment.html>