[Simh] Intel systems problems.
Gene Irwin
girwin1215 at gmail.com
Wed Jan 9 16:20:27 EST 2019
I run under linux but I am installing the mingw stuff on a win 7 cm
I will update soon
On Wed, Jan 9, 2019, 12:43 PM Bill Beech (NJ7P) <nj7p at nj7p.org> wrote:
> Gene,
>
> Sorry you are having problems with this.
>
> My code is still very beta and sometimes it will work. The version of the
> system you show running is an old version for me, but not for the GitHub
> repository.
>
> I am trying to figure out what you are doing, so some questions:
>
> Are you using my support files from my web site?
>
> Are you using MinGW for building?
>
> Thanks!
>
> Nill
> On 1/9/2019 11:04 AM, Gene Irwin wrote:
>
> I'm trying to get the isys80x0 series to use the floppy disk controllers,
> but no matter what I try to do in the SCP as far as enabling or disabling
> the SBC20x or ZX200A, the mon80 (a or b) always says "No Disk Controller
> Present" when I issue the FB command.
>
> I'm probably missing something like a port output command, or a complie
> time setting, or something.
>
> When I start the emulator I get:
>
> -----------------
> $ isys8010
> Initializing iSBC-80/10 SBC
> Onboard Devices:
> 8080: Reset
> 8251-0: Hardware Reset
> 8251-0: Registered at 00EC
> Port 00EC is assigned to dev 0000
> Port 00ED is assigned to dev 0000
> 8251-0: Software Reset
> 8255-0: Reset
> 8255-0: Registered at 00E4
> Port 00E4 is assigned to dev 0000
> Port 00E5 is assigned to dev 0000
> Port 00E6 is assigned to dev 0000
> Port 00E7 is assigned to dev 0000
> 8255-1: Reset
> 8255-1: Registered at 00E8
> Port 00E8 is assigned to dev 0001
> Port 00E9 is assigned to dev 0001
> Port 00EA is assigned to dev 0001
> Port 00EB is assigned to dev 0001
> EPROM: Configured, Not attached
> Multibus: Reset
> iSBC-201 FDC Board - Not Found
> iSBC-202 FDC Board - Found
> isbc202-0: Hardware Reset
> isbc202-0: Registered at 0078
> Port 0078 is assigned to dev 0000
> Port 0079 is assigned to dev 0000
> Port 007A is assigned to dev 0000
> Port 007B is assigned to dev 0000
> Port 007F is assigned to dev 0000
> isbc202-0: Software Reset
> SBC2020: Configured, Status=19 Attached to (null)
> SBC2021: Configured, Status=1B Attached to (null)
> SBC2022: Configured, Status=3B Attached to (null)
> SBC2023: Configured, Status=7B Attached to (null)
> isbc202-0: Software Reset
> SBC2020: Configured, Status=19 Attached to (null)
> SBC2021: Configured, Status=1B Attached to (null)
> SBC2022: Configured, Status=3B Attached to (null)
> SBC2023: Configured, Status=7B Attached to (null)
> ZX-200A FDC Board - Not Found
>
> Intel System 80/10 simulator V4.0-0 Current git commit id: 584147fb
> sim>
> -----------------------------------
> But devices are all disabled:
> -----------------------------------
> sim> sh de
> Intel System 80/10 simulator configuration
>
> I8080
> EPROM
> RAM
> I8251
> I8255 2 units
> MBIRQ
> SBC064 disabled
> SBC201 disabled
> SBC202 disabled
> ZX200A disabled
> sim>
> ---------------------------------------------------
>
> and if I enable or disable any of the 3 devices and issue a reset command,
> I get the same output as the initial status display, nothing changes.
>
> what am I doing wrong?
>
> I'm trying to use Bill Beech's config files, disk images and rom images to
> boot CP/M on these devices but I can't find any documentation that will
> clear up any of the issues I am having.
>
> Thanks for looking into this . . .
>
> _______________________________________________
> Simh mailing listSimh at trailing-edge.comhttp://mailman.trailing-edge.com/mailman/listinfo/simh
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20190109/bc4b17aa/attachment-0001.html>
More information about the Simh
mailing list