[Simh] Intel systems problems.

[Bill Beech (NJ7P)]

Gene,

Sorry you are having problems with this.

My code is still very beta and sometimes it will work.  The version of 
the system you show running is an old version for me, but not for the 
GitHub repository.

I am trying to figure out what you are doing, so some questions:

Are you using my support files from my web site?

Are you using MinGW for building?

Thanks!

Nill

On 1/9/2019 11:04 AM, Gene Irwin wrote:
> I'm trying to get the isys80x0 series to use the floppy disk 
> controllers, but no matter what I try to do in the SCP as far as 
> enabling or disabling the SBC20x or ZX200A, the mon80 (a or b) always 
> says "No Disk Controller Present" when I issue the FB command.
>
> I'm probably missing something like a port output command, or a 
> complie time setting, or something.
>
> When I start the emulator I get:
>
> -----------------
> $ isys8010
> Initializing iSBC-80/10 SBC
>    Onboard Devices:
>    8080: Reset
>       8251-0: Hardware Reset
>       8251-0: Registered at 00EC
>          Port 00EC is assigned to dev 0000
>          Port 00ED is assigned to dev 0000
>       8251-0: Software Reset
>       8255-0: Reset
>       8255-0: Registered at 00E4
>          Port 00E4 is assigned to dev 0000
>          Port 00E5 is assigned to dev 0000
>          Port 00E6 is assigned to dev 0000
>          Port 00E7 is assigned to dev 0000
>       8255-1: Reset
>       8255-1: Registered at 00E8
>          Port 00E8 is assigned to dev 0001
>          Port 00E9 is assigned to dev 0001
>          Port 00EA is assigned to dev 0001
>          Port 00EB is assigned to dev 0001
>       EPROM: Configured, Not attached
>    Multibus: Reset
>       iSBC-201 FDC Board - Not Found
>       iSBC-202 FDC Board - Found
>          isbc202-0: Hardware Reset
>          isbc202-0: Registered at 0078
>          Port 0078 is assigned to dev 0000
>          Port 0079 is assigned to dev 0000
>          Port 007A is assigned to dev 0000
>          Port 007B is assigned to dev 0000
>          Port 007F is assigned to dev 0000
>          isbc202-0: Software Reset
>          SBC2020: Configured, Status=19 Attached to (null)
>          SBC2021: Configured, Status=1B Attached to (null)
>          SBC2022: Configured, Status=3B Attached to (null)
>          SBC2023: Configured, Status=7B Attached to (null)
>          isbc202-0: Software Reset
>          SBC2020: Configured, Status=19 Attached to (null)
>          SBC2021: Configured, Status=1B Attached to (null)
>          SBC2022: Configured, Status=3B Attached to (null)
>          SBC2023: Configured, Status=7B Attached to (null)
>       ZX-200A FDC Board - Not Found
>
> Intel System 80/10 simulator V4.0-0 Current        git commit id: 584147fb
> sim>
> -----------------------------------
> But devices are all disabled:
> -----------------------------------
> sim> sh de
> Intel System 80/10 simulator configuration
>
> I8080
> EPROM
> RAM
> I8251
> I8255    2 units
> MBIRQ
> SBC064    disabled
> SBC201    disabled
> SBC202    disabled
> ZX200A    disabled
> sim>
> ---------------------------------------------------
>
> and if I enable or disable any of the 3 devices and issue a reset 
> command, I get the same output as the initial status display, nothing 
> changes.
>
> what am I doing wrong?
>
> I'm trying to use Bill Beech's config files, disk images and rom 
> images to boot CP/M on these devices but I can't find any 
> documentation that will clear up any of the issues I am having.
>
> Thanks for looking into this . . .
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20190109/73a29ebf/attachment.html>