[Simh] qvss (vcb01) configuration , No known examples ?
James W. Laferriere
babydr at baby-dragons.com
Tue Jun 26 18:30:18 EDT 2018
Hello Henry , My more recent post begs to wait till we can figure out
how to get my SIMH to 'boot cpu' , then I can try diagnosing qvss further .
Thank you for your config below . I did find out that with only either
of 'set qvss enable' or 'set cpu model=vaxstation' no more segmentation faults .
I will dig into it some more after the work on the 'file open error' .
Twyl , JimL
On Tue, 26 Jun 2018, Henry Bent wrote:
> Here are the contents of my SIMH ini file, which may be of use as a
> starting point. I am using the microvax2 simulator, compiled locally, and
> I wonder if your difficulties stem from using a different or older
> executable. What operating system and SIMH version are you using?
>
> --
> set cpu idle=ultrixold
> set cpu autoboot
> att nvr microvax2.nvr
> set wtc time=std
> set rq0 ra82
> att rq0 ra82.dsk
> set rq1 dis
> set rq2 dis
> set rq3 dis
> set cr dis
> set lpt dis
> set rl dis
> set tq0 lock
> set tq1 dis
> set tq2 dis
> set tq3 dis
> set ts dis
> set tti 7b
> set tto 7b
> set qvss enable
> set xq type=deqna
> set xq MAC=08:00:2B:1C:63:00
> att xq tap:tap3
> set dz lines=8
> set dz 7b
> att dz 630
> boot
> --
>
> -Henry
>
> On 26 June 2018 at 17:15, James W. Laferriere <babydr at baby-dragons.com>
> wrote:
>
>> Hello Henry ,
>>
>> On Tue, 26 Jun 2018, Henry Bent wrote:
>>
>> Hi JimL,
>>>
>>> I have a fully working emulation of a MicroVAX II running Ultrix 2.3 and
>>> X11R1 on Linux locally, with the most recent SIMH from git. Is there a
>>> specific configuration you are looking to replicate, or have I
>>> misunderstood your question?
>>> -Henry
>>>
>>
>> The configuration for at the simh level for one . I've tried
>> putting in the 'SET CPU MODEL=VAXStation' and 'SET QVSS ENABLE" got me a
>> segmentation fault .
>> With just the 'SET CPU MODEL=VAXStation' the config runs without
>> any difficulties . I am uninformed enough that I am worried that this
>> command needs other or more configuration in order to bring up *windows* at
>> OS runtime .
>>
>> If I can get the 'Necessary' and hopefully correct 'SET' commands
>> that will not cause other or more difficulties .
>>
>> And BTW I am being very dumbed'down in my requests above as SIMH
>> is of new use to me . I have a qbus varient of the 3900 (or there abouts)
>> which I have much time spent on .
>>
>> A Ray Jewhurst , Is also looking for such info at both the SIMH
>> level & then in the appropriate configuration at the DecWindows level .
>>
>> Tia , JimL
>>
>>
>> On 26 June 2018 at 16:27, James W. Laferriere <babydr at baby-dragons.com>
>>> wrote:
>>>
>>>> Hello All , In my google searching for examples of (Hopefully
>>>> correct) configurations of the qvss in the VAX portion of simh . I have
>>>> come across exactly 0 (zero) configuration examples that are not
>>>> associated
>>>> with a trouble ticket or failure in some other part or device in the VAX
>>>> implementation .
>>>>
>>>> Does such an example exist ?
>>>>
>>>> Tia , JimL
>>>> --
>>>> +------------------------------------------------------------------+
>>>> | James W. Laferriere | System Techniques | Give me VMS |
>>>> | Network&System Engineer | 3237 Holden Road | Give me Linux |
>>>> | babydr at baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
>>>> +------------------------------------------------------------------+
>>>> _______________________________________________
>>>> Simh mailing list
>>>> Simh at trailing-edge.com
>>>> http://mailman.trailing-edge.com/mailman/listinfo/simh
>>>>
>>>
>>>
>> --
>> +------------------------------------------------------------------+
>> | James W. Laferriere | System Techniques | Give me VMS |
>> | Network&System Engineer | 3237 Holden Road | Give me Linux |
>> | babydr at baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
>> +------------------------------------------------------------------+
>>
>
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network&System Engineer | 3237 Holden Road | Give me Linux |
| babydr at baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
+------------------------------------------------------------------+
More information about the Simh
mailing list