[Simh] Moved my vaxuser to new standalone system and ...
James W. Laferriere
babydr at baby-dragons.com
Sun Jul 1 22:07:00 EDT 2018
Hello All , Found the entry in the .ini file that was causing the
problem ...
SET CPU MODEL=VAXStation
I'll try tomorrow
SET QVSS ENABLE
To see if there is a difference .
Twyl , JimL
On Tue, 26 Jun 2018, James W. Laferriere wrote:
> Hello All , I moved my simh (ie: vaxuser) to a standalone system at
> my home (info below) and now simh fails with "File open error..." , Not
> understanding why this is the case . I've recompiled all the necessary
> components (that I am aware of) , and then recompiled SIMH .
>
> Would someone please point a finger at what I might be doing wrong
> and/or request of me more info with the necessary commands to do so .
>
> Tia , JimL
>
>
> root at vaxbox:~# /usr/src/linux/scripts/ver_linux If some fields are empty or
> look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux vaxbox 4.4.132-smp #2 SMP Mon May 21 15:50:54 CDT 2018 i686 Intel(R)
> Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux
>
> GNU C 5.5.0
> GNU Make 4.1
> Binutils 2.26.20160125
> Util-linux 2.27.1
> Mount 2.27.1
> Module-init-tools 22
> E2fsprogs 1.43.1
> Jfsutils 1.1.15
> Reiserfsprogs 3.6.24
> Xfsprogs 4.3.0
> Pcmciautils 018
> Quota-tools 4.03
> PPP 2.4.7
> Linux C Library 2.23
> Dynamic linker (ldd) 2.23
> Linux C++ Library 6.0.21
> Net-tools 1.60
> Kbd 1.15.3
> Console-tools 1.15.3
> Sh-utils 8.25
> Udev 220
> Wireless-tools 29
> Modules Loaded agpgart bluetooth button coretemp dcdbas drm
> drm_kms_helper e1000e ehci_hcd ehci_pci evdev fb_sys_fops fjes fuse gpio_ich
> hid hid_generic hwmon i2c_algo_bit i2c_core i2c_dev i2c_i801 intel_agp
> intel_gtt ipv6 irqbypass kvm kvm_intel loop lpc_ich mxm_wmi nfnetlink
> nfnetlink_log nfnetlink_queue nouveau pps_core processor psmouse ptp rfkill
> serio_raw shpchp snd snd_hda_codec snd_hda_codec_generic snd_hda_codec_idt
> snd_hda_core snd_hda_intel snd_hwdep snd_pcm snd_timer soundcore syscopyarea
> sysfillrect sysimgblt tpm tpm_tis ttm tun uhci_hcd usbhid video wmi
>
>
> sim> sh ver
> VAXStation 3900 (KA655) simulator V4.0-0 Current
> Simulator Framework Capabilities:
> 64b data
> 64b addresses
> Threaded Ethernet Packet transports:PCAP:TAP:NAT:UDP
> Idle/Throttling support is available
> Virtual Hard Disk (VHD) support
> RAW disk and CD/DVD ROM support
> Asynchronous I/O support (Lock free asynchronous event queue)
> Asynchronous Clock support
> FrontPanel API Version 12
> Host Platform:
> Compiler: GCC 5.5.0
> Simulator Compiled as C arch: x86 (Release Build) on Jun 24 2018 at
> 09:19:38
> Memory Access: Little Endian
> Memory Pointer Size: 32 bits
> Large File (>2GB) support
> SDL Video support: SDL Version 2.0.8
> PCRE RegEx (Version 8.39 2016-06-14) support for EXPECT commands
> OS clock resolution: 1ms
> Time taken by msleep(1): 1ms
> OS: Linux vaxbox 4.4.132-smp #2 SMP Mon May 21 15:50:54 CDT 2018 i686
> Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux
> git commit id: 0fa5807e
> git commit time: 2018-05-28T11:58:42-0700
>
> sim> sh conf
> VAXStation 3900 (KA655) simulator configuration
>
> CPU idle=VMS, idle enabled, model=MicroVAX 3900 (KA655), NOAUTOBOOT
> 512MB, HALT to console
> TLB 2 units
> TLB0 8192W
> TLB1 8192W
> ROM address=0x20040000-0x2005ffff
> 128KB, 1usec calibrated access
> NVR address=0x20140400-0x201407ff
> 1024B, attached to /home/vaxuser/VAX-DISKS/vaxZ-nvram.bin
> SYSD 2 units
> SYSD0
> SYSD1
> QBA autoconfiguration enabled
> CLK vector=C0, BR6
> 12B
> TTI vector=F8, BR4
> 8b
> TTO vector=FC, BR4
> 8b
> CSI vector=F0, BR4
> CSO vector=F4, BR4
> not attached
> TDC disabled
> DZ disabled
> VH address=20000120-2000012F*, vector=2C0-2C4*, BR4, lines=8
> attached to 65000, DHV mode, Modem
> Hangup, 0 current connections
> CR disabled
> LPT disabled
> QVSS Uncaptured Input Mode, address=20001E80-20001EBF, vector=2C8-2CC*,
> BR4
> LK
> VS
> RL disabled
> RQ address=20001468-2000146B, no vector, BR4, RQDX3, 4 units
> RQ0 4290MB, attached to /home/vaxuser/VAX-DISKS/vaxX-vms-rq0.dsk, write
> enabled
> RA8U, UNIT=0, autosize
> RAW format
> RQ1 1505MB, attached to /home/vaxuser/VAX-DISKS/vaxX-vms-rq1.dsk, write
> enabled
> RA92, UNIT=1, autosize
> RAW format
> RQ2 625MB, attached to
> /home/vaxuser/VAX-INSTALL-MEDIA/VMS-7_2-ODS-cdrom.iso, read only
> RRD40, UNIT=2, autosize
> RAW format
> RQ3 409KB, not attached, write enabled
> RX50, UNIT=3, autosize
> AUTO format
> RQB disabled
> RQC disabled
> RQD disabled
> TS disabled
> TQ disabled
> XQ address=20001920-2000192F, no vector, BR4, MAC=08:00:2B:33:44:55
> type=DELQA, polling=disabled, sanity=OFF
> throttle=disabled, DEQNALock=OFF, leds=(ON,ON,ON)
> not attached
> XQB disabled
> sim>
>
> With the above I am getting ....
>
> sim> boot cpu
> No protocol specified
> No protocol specified
> xcb_connection_has_error() returned true
> No protocol specified
> xcb_connection_has_error() returned true
> No protocol specified
> QVSS: Error Creating Video Window: No available video device
>
> File open error, PC: 00000000 (HALT)
>
>
>
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network&System Engineer | 3237 Holden Road | Give me Linux |
| babydr at baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
+------------------------------------------------------------------+
More information about the Simh
mailing list