[Simh] qvss (vcb01) configuration , No known examples ?
Mark Pizzolato
Mark at infocomm.com
Sun Jul 1 15:03:38 EDT 2018
Hi James,
What Linux distribution are you working on? If you've got specific input
that causes segfaults, then that will be fixed as soon as a reproducible
case is available.
- Mark
On Tuesday, June 26, 2018 at 3:30 PM, James W. Laferriere wrote:
> Hello Henry , My more recent post begs to wait till we can figure out
> how to get my SIMH to 'boot cpu' , then I can try diagnosing qvss further .
>
> Thank you for your config below . I did find out that with only either
> of 'set qvss enable' or 'set cpu model=vaxstation' no more segmentation faults
> .
>
> I will dig into it some more after the work on the 'file open error' .
>
> Twyl , JimL
>
> On Tue, 26 Jun 2018, Henry Bent wrote:
> > Here are the contents of my SIMH ini file, which may be of use as a
> > starting point. I am using the microvax2 simulator, compiled locally, and
> > I wonder if your difficulties stem from using a different or older
> > executable. What operating system and SIMH version are you using?
> >
> > --
> > set cpu idle=ultrixold
> > set cpu autoboot
> > att nvr microvax2.nvr
> > set wtc time=std
> > set rq0 ra82
> > att rq0 ra82.dsk
> > set rq1 dis
> > set rq2 dis
> > set rq3 dis
> > set cr dis
> > set lpt dis
> > set rl dis
> > set tq0 lock
> > set tq1 dis
> > set tq2 dis
> > set tq3 dis
> > set ts dis
> > set tti 7b
> > set tto 7b
> > set qvss enable
> > set xq type=deqna
> > set xq MAC=08:00:2B:1C:63:00
> > att xq tap:tap3
> > set dz lines=8
> > set dz 7b
> > att dz 630
> > boot
> > --
> >
> > -Henry
> >
> > On 26 June 2018 at 17:15, James W. Laferriere <babydr at baby-dragons.com>
> > wrote:
> >
> >> Hello Henry ,
> >>
> >> On Tue, 26 Jun 2018, Henry Bent wrote:
> >>
> >> Hi JimL,
> >>>
> >>> I have a fully working emulation of a MicroVAX II running Ultrix 2.3 and
> >>> X11R1 on Linux locally, with the most recent SIMH from git. Is there a
> >>> specific configuration you are looking to replicate, or have I
> >>> misunderstood your question?
> >>> -Henry
> >>>
> >>
> >> The configuration for at the simh level for one . I've tried
> >> putting in the 'SET CPU MODEL=VAXStation' and 'SET QVSS ENABLE" got me
> a
> >> segmentation fault .
> >> With just the 'SET CPU MODEL=VAXStation' the config runs without
> >> any difficulties . I am uninformed enough that I am worried that this
> >> command needs other or more configuration in order to bring up
> *windows* at
> >> OS runtime .
> >>
> >> If I can get the 'Necessary' and hopefully correct 'SET' commands
> >> that will not cause other or more difficulties .
> >>
> >> And BTW I am being very dumbed'down in my requests above as SIMH
> >> is of new use to me . I have a qbus varient of the 3900 (or there abouts)
> >> which I have much time spent on .
> >>
> >> A Ray Jewhurst , Is also looking for such info at both the SIMH
> >> level & then in the appropriate configuration at the DecWindows level .
> >>
> >> Tia , JimL
> >>
> >>
> >> On 26 June 2018 at 16:27, James W. Laferriere <babydr at baby-
> dragons.com>
> >>> wrote:
> >>>
> >>>> Hello All , In my google searching for examples of (Hopefully
> >>>> correct) configurations of the qvss in the VAX portion of simh . I have
> >>>> come across exactly 0 (zero) configuration examples that are not
> >>>> associated
> >>>> with a trouble ticket or failure in some other part or device in the VAX
> >>>> implementation .
> >>>>
> >>>> Does such an example exist ?
> >>>>
> >>>> Tia , JimL
> >>>> --
> >>>> +------------------------------------------------------------------+
> >>>> | James W. Laferriere | System Techniques | Give me VMS |
> >>>> | Network&System Engineer | 3237 Holden Road | Give me Linux |
> >>>> | babydr at baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
> >>>> +------------------------------------------------------------------+
> >>>> _______________________________________________
> >>>> Simh mailing list
> >>>> Simh at trailing-edge.com
> >>>> http://mailman.trailing-edge.com/mailman/listinfo/simh
> >>>>
> >>>
> >>>
> >> --
> >> +------------------------------------------------------------------+
> >> | James W. Laferriere | System Techniques | Give me VMS |
> >> | Network&System Engineer | 3237 Holden Road | Give me Linux |
> >> | babydr at baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
> >> +------------------------------------------------------------------+
> >>
> >
>
> --
> +------------------------------------------------------------------+
> | James W. Laferriere | System Techniques | Give me VMS |
> | Network&System Engineer | 3237 Holden Road | Give me Linux |
> | babydr at baby-dragons.com | Fairbanks, AK. 99709 | only on AXP |
> +------------------------------------------------------------------+
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
More information about the Simh
mailing list