[Simh] VMScluster installation guide?

[Vorländer, Martin]

I agree with Zane.

In particular, chapter 8 of the "OpenVMS Cluster Systems" manual describes the whole procedure.

I’m not sure, though, whether you can set up a SIMH cluster with a shared system disk, in that the host OS might not be prepared fort wo programs accessing the same file.

HTH,
Martin

---
Von: Simh [mailto:simh-bounces at trailing-edge.com] Im Auftrag von Zane Healy
Gesendet: Freitag, 16. Februar 2018 05:32
An: Tim Stark <fsword007 at gmail.com>
Cc: simh at trailing-edge.com
Betreff: Re: [Simh] VMScluster installation guide?

You probably want to look online for the following VMS manuals.

“Cluster Systems”
“Guidelines for OpenVMS Cluster Configurations” 

I’m trying to find time to read through them myself.  Setting up a basic cluster is easy, but it’s been nearly 20 years since I last ran a cluster, so there is a lot I don’t remember.

Zane




On Feb 15, 2018, at 5:50 PM, Tim Stark <mailto:fsword007 at gmail.com> wrote:

Folks,
 
Does anyone have good VMScluster installation guide for SIMH VAX emulator?
 
I had seen that some time ago but today I tried to search through google but found no sources so far.
 
I successfully installed full package of OpenVMS on my Pi clone (Tinker) with many layered products.
 
I am still working on Multinet configuration for DHCP client.
 
I read some Multinet installation guide and found it elsewhere.  I had to enable DHCLIENT flag on SE0 interface to resolve the problem with DHCLIENT process.
 
I tried to clear default TCP/IP settings with SE0 interface (modify se0) on CONFIG.INTERFACE to allow DHCLIENT working for automated TCP/IP setting properly but…
It failed and complaint about gateway address. I now need to clear gateway address.
Thanks,
Tim
_______________________________________________
Simh mailing list
mailto:Simh at trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh