[Simh] Problems install RSX-11M+ v4.6

[Jordi Guillaumes i Pons]

Speaking from memory, the RQ devices are DU in RSX. The DB RSX devices correspond to RP in simh. 

Jordi Guillaumes Pons


El 7 maig 2017, a les 21:05, Ray Jewhurst <raywjewhurst at gmail.com> va escriure:
> Hello everyone,
> I am trying to do my first installation and sysgen of RSX-11M+ (actually first of any RSX-11!) and I am follow the instructions at http://www.9track.net/pdp11/rsx4_sysgen and I am having problems right out of the gate. When I try to copy the baseline system this is what I get:
> 
> RSX-11M/RSX-11M-PLUS STANDALONE COPY SYSTEM V4.8
> 
> 
> RSX-11M/RSX-11M-PLUS Standalone Configuration and Disk Sizing Program
> 
> Valid switches are:
>         /CSR=nnnnnn to change the default device CSR
>         /VEC=nnn to change the default device vector
>         /FOR=n to change the default magtape formatter number
>         /DEV to list all default device CSR and vectors
> 
> 
> Enter first device: ms0:
> 
> Enter second device: db0:
> 
> Invalid device
> 
> This is my config:
> set cpu 11/73
> set rqb enable
> set rq0 ra92
> set rq1 ra92
> set rq2 ra92
> set rq3 ra92
> set rqb0 ra92
> set rqb1 ra92
> set rqb2 rx50
> set rqb3 cdrom
> set tm disable
> set ts enable
> set vh enable
> set vh lines=16
> at rq0 d0.dsk
> at rq1 d1.dsk
> at rq2 d2.dsk
> at rq3 d3.dsk
> at rqb0 db0.dsk
> at rqb1 db1.dsk
> at ts BB-J0830-01.M01_RSX11M+_V4.6_1999.tap
> set xq mac=08-00-2b-1a-2b-3c
> at xq eth0
> set con telnet=1026
> b ts
> 
> Every source I have found says that an rq disk in simh should be db in RSX but it doesn't work.  I have even tried other rq disks to no avail.  I want to do some experimenting and join HECNET eventually which is why I chose such large drives.
> 
> Any assistance would be kind and helpful.
> Thanks,
> Ray
> 
> 
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20170508/bc2b6e19/attachment.html>