[Simh] Release of a set of simulators for IBM 7000 series mainframes

[Sancho Villa, Roberto]

Congratulations!
Great and fine release! Very good work.

Regards
Roberto
> ----------------------------------------------------------------------
>
>Message: 1
>Date: Thu, 28 Dec 2017 13:23:25 -0500
>From: Richard Cornwell <rich at sky-visions.com>
>To: simh at trailing-edge.com
>Subject: [Simh] Release of a set of simulators for IBM 7000 series
>mainframes.
>Message-ID: <20171228132325.43f2fcde.rich at sky-visions.com>
>Content-Type: text/plain; charset=US-ASCII
>
>I am pleased to announce the release of a set of simulators for IBM
>7000 series mainframes. This includes simulators for the IBM 701, IBM 702, IBM 704, IBM 705, IBM 705/3, IBM 709, IBM 1410/IBM 7010, IBM 7070, IBM 7080, >IBM 7090 and IBM7094. These are available from the Computer History Simulation Project (SIMH) site:
>
>  https://github.com/simh/simh
>
> Software for these simulators can be found at:
>
>  http://sky-visions.com/ibm
>
> Currently there is the following available:
>
>  IBM 705: Some stand alone programs.
>  IBM 7080: Diagnostics.
>  IBM 1410/7010: PR 155 & PR108.
>  IBM 704: SAP (assembler) and soon Fortran II.
>  IBM 709: Lisp 1.5, 9AP (assembler), Diagnostics
>  IBM 7090/7094: IBSYS and CTSS.
>
>  CTSS sources and binaries are available at:
>
>  https://github.com/rcornwell/ctss
>
> I am still working on an automatic rebuild of CTSS using IBSYS to build the basic binaries. However prebuild disk images are available.
>
> These simulators have been developed over many years and I have way too many people to thank for the help that they have given in testing and recovery of
> software. Some of these simulators are more stable then others, the more software that I have to test them the more stable they are. The IBM 701 and IBM
> 7070 are fairly untested since there is almost no software for either of these machines. These machines all shared a common set of I/O devices so it made sense
> to implement them as a collection.
>
> I plan to add in a IBM 7030 simulator after I finish transcribing and proofing the diagnostics and MCP and write a assembler for the machine.
>
> I would also like to do a 7040/4 if anyone can find a copy of either IBSYS or DCSYS for it.
>
> Rich
>
> --
> ==========================================================================
> Richard Cornwell
> rich at sky-visions.com
> http://sky-visions.com
> LinkedIn:   https://www.linkedin.com/in/richard-cornwell-991076107
> ==========================================================================


________________________________

Este correo electrónico y, en su caso, cualquier fichero anexo al mismo, contiene información de carácter confidencial exclusivamente dirigida a su destinatario o destinatarios. Si no es vd. el destinatario indicado, queda notificado que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. En el caso de haber recibido este correo electrónico por error, se ruega notificar inmediatamente esta circunstancia mediante reenvío a la dirección electrónica del remitente.
Evite imprimir este mensaje si no es estrictamente necesario.

This email and any file attached to it (when applicable) contain(s) confidential information that is exclusively addressed to its recipient(s). If you are not the indicated recipient, you are informed that reading, using, disseminating and/or copying it without authorisation is forbidden in accordance with the legislation in effect. If you have received this email by mistake, please immediately notify the sender of the situation by resending it to their email address.
Avoid printing this message if it is not absolutely necessary.