[Simh] Simh Digest, Vol 167, Issue 30

[Kurt Hamm]

My sincere apologies to the group for posting a complete thread with my
question below.

I wanted to clarify.  I can connect the terminal to the Raspberry Pi via
Raspian with no problem.  I would like to connect the terminal as a serial
device within Simh.

Kurt


> Message: 6
> Date: Tue, 12 Dec 2017 08:52:39 -0500
> From: Kurt Hamm <kurt at hamm.me>
> To: simh at trailing-edge.com
> Subject: Re: [Simh] Simh Digest, Vol 159, Issue 26
> Message-ID:
>         <CAJRDvfWDKDDw5jS23BQUZqC5z89wd5U6F3i90cRNFg-ZDkkfLA at mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I am having a devil of a time hooking a physical VT220 into my Raspberry PI
> Simh VAX.  Everything is setup and working beautifully.  I can telnet from
> another computer with no trouble and get a vax login.
>
> I have a ttyusb0 connection.  I can echo text to the terminal with no
> problem.
>
> I can configure Raspian to divert the console to the terminal with no
> problem.  But, I can't telnet to the vax from the Raspberry PI operating
> system.  I can telnet from another PC, but not from within the Raspberry
> Pi.  So, that doesn't give me the Vax login on the terminal.
>
> So, I tried to create a serial connection to the ttyUSB0 using various
> means.
> Method 1) attach ttix line=0,connect=/dev/ttyUSB0;1200-7n1 - This results
> in an error that says non-existent device.
> Method 2) attach dz line=0,connect=/dev/ttyUSB0;9600-8n1 - This seemed to
> run successfully, but showed nothing on the terminal after a reboot.
>
> Is there a way to connect a physical serial terminal via /dev/ttyUSB0 using
> SIMh Microvax 3900 simulator?
>
> Thanks for any advice.
>
> Kurt
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20171212/bb56cb0e/attachment.html>