[Simh] PDP8 TTIX Outbound Telnet Connection

[Rob Jarratt]

I have just been looking at the problem again and realised the remote port
was still connected to something else, so simh couldn't connect to it. Sorry
about that.

 

Regards

 

Rob

 

From: Mark Pizzolato [mailto:Mark at infocomm.com] 
Sent: 05 November 2016 18:20
To: rob at jarratt.me.uk; simh at trailing-edge.com
Subject: RE: [Simh] PDP8 TTIX Outbound Telnet Connection

 

Hi Rob,

 

This is one of those 'it works for me' cases, and you haven't provided any
details about exactly what you're doing, so I can't suggest what might be
happening.

 

Please provide:

1)      SHOW VERSION output and the full configuration file for the case
which works.

2)      SHOW VERSION output and the full configuration file for the case
which fails along with any failure messages you might be seeing.

 

Thanks.

 

-          Mark

 

From: Rob Jarratt
Sent: Saturday, November 5, 2016 11:03 AM
To: simh at trailing-edge.com <mailto:simh at trailing-edge.com> 
Subject: [Simh] PDP8 TTIX Outbound Telnet Connection

 

In the PDP10 emulation I use a command like this following to connect the DZ
to a DECserver which I then have connected to a Teletype, and it works
great:

 

att dz line=1,connect=192.168.0.231:2006;telnet

 

This allows me to connect the Teletype as if it was another terminal.

 

I am trying to do the same thing now in the PDP8 emulation with TTIX, but it
does not seem to work when I try this:

 

att ttix line=1,connect=192.168.0.231:2006;telnet

 

Am I doing something wrong?

 

Regards

 

Rob

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20161105/371f9c08/attachment-0001.html>