[Simh] Unable to locate boot file

Tue Jun 21 11:14:20 EDT 2016

Hello Jean-Claude,

In my vax.ini file:

set xq enabled

set xq mac=AA-00-04-00-B6-11

set xq type=delqa

attach xq0 eth0

And from the simulator:

$ show dev xq

Device     Device        Error

Name       Status        Count

XQA0:      Online        0

XQA1:      Online        0

XQA2:      Online        0

XQA3:      Online        0

XQA4:      Online        0

XQA5:      Online        0

XQA6:      Online        0

XQA7:      Online        0

XQA8:      Online        0

Thanks,

Daniel

________________________________
From: Jean-Claude Parel <jcparel at fr.ibm.com>
Sent: Monday, June 20, 2016 11:33 PM
To: Daniel Parrott
Cc: simh at trailing-edge.com
Subject: Re: [Simh] Unable to locate boot file

Hello, Daniel

How many network interfaces have you defined in your emulated VAX configuration ?

Cordialement/Regards
________________________________

Jean-Claude Parel        21, Chemin De La Sauvegarde
[cid:_1_08FC047408F1A59000173A45C1257FD9]

OpenVMS Architect        Ecully, 69132
458601   France
Global Business Services
Phone:  +33-4-7218-4095
Home:   +33-4-7558-3550
Mobile:         +33-6.7171.0434
e-mail:         jcparel at fr.ibm.com

From:        Daniel Parrott <danielthegreat at msn.com>
To:        "simh at trailing-edge.com" <simh at trailing-edge.com>
Date:        20/06/2016 22:16
Subject:        [Simh] Unable to locate boot file
Sent by:        "Simh" <simh-bounces at trailing-edge.com>
________________________________

I have two physical systems, a VAX 6220 and a VAX 4000-300.  The latter system is set up to do a network bootstrap off the 6220 using an EZA0 network device.

First, using vddriver and backup/image, I generated and retrieved disk images of the RA92 drives from the 6220.  With these disk images, and specifying MicroVAX 3900 on the SimH simulator, I am able to boot up an emulated version of the 6220 on my laptop.  So far so good.

My first goal is to get the physical VAX 4000-300 to do its network bootstrap off the emulated 6220 rather than the physical 6220.  By the way, I am running SimH 4.0 on Windows 8, it seems to work OK.

The first problem I ran into was that the simulator presents a different network adapter to the emulated 6220 than it is accustomed to seeing.  It typically sees a "BNA-0" interface, but the simulator uses "QNA-0", as derived from the XQA0 device.  So, I found out that I needed to run netconfig.com.  When I ran that script, it brought the circuit online.

But when I tried to do network boot of the physical VAX 4000-300 off the emulated 6220, it kept saying 'retrying network bootstrap'.  So evidently that was not sufficient.  Then I came to discover that the 6220 uses DECserver, and there is a dsvconfig.com script.  Once again, because the simulator presented a different network device than the 6220 was accustomed to seeing, the configuration had to be updated.  So okay, I ran the dsvconfig.com script, and made it aware of the fact that it is now a "QNA-0" device rather than a "BNA-0" device.

So after running both netconfig.com and dsvconfig.com on the emulated 6220, the physical 4000-300 no longer says "retrying network bootstrap".  Instead it now appears to be able to communicate, but it says "unable to locate boot file":

>>> b eza0
(BOOT/R5:0 EZA0)

  2..
-EZA0
  1..0..

%VAXcluster-I-SYSLOAD, system loaded from node ORION (AA-00-04-00-B6-11)

%VAXcluster-F-BADOPEN, unable to locate BOOT file
?06 HLT INST
                PC = 00007395
>>>

Using Wireshark, I captured some of the packets to try to glean some more details, and I see messages like "VAXcluster-F-NOSUCHDEV, nonexistent drive" and "VAXcluster-F-READERR, I/O error reading boot file".

I am really stumped on this one because basically the disk images should be one-to-one copies of what is on the physical VAX 6220, so other than having to tell it that it has a different network adapter (QNA-0 rather than BNA-0), why shouldn't it just work?  Does SimH not support MOP or DECserver?  I did check, and the sysboot.exe file is present in dua0:[sys14.syscommon.sysexe], and sys14 is the directory for the VAX 4000-300 to use for its network boot.  So I believe the boot file is available.

By the way, the VAX 6220 is running VMS 5.5-2H.  And I have set VAXCLUSTER to 2.

Oh and one more thing, when the 4000-300 fails to boot, on the simulator side of things I see the following:

%%%%%%%%%%%% OPCOM  20-JUN-2016  15:10:06.58 %%%%%%%%
Message from user DECNET on ORION
DECnet event 0.3, automatic line service
>From node 4.438 (ORION), 20-JUN-2016 15:10:06.58
Circuit QNA-0, Load, Requested, Node = 4.764 (GUINAN)
File = DISK$VMSRL5:<SYS14.>, Operating system, Ethernet address = 08-00-2B-23-9A-F4

%%%%%%%%%%%% OPCOM  20-JUN-2016  15:10:11.58 %%%%%%%%
Message from user DECNET on ORION
DECnet event 0.3, automatic line service
>From node 4.438 (ORION), 20-JUN-2016 15:10:06.75
Circuit QNA-0, Load, Successful, Node = 4.764 (GUINAN)
File = DISK$VMSRL5:<SYS14.>, Operating system, Ethernet address = 08-00-2B-23-9A-F4

%PEA0, Port has Closed Virtual Circuit - REMOTE NODE GUINAN

So it almost looks like it has done a successful load of the system software to the 4000-300, but then the port closes presumably due to not being able to locate the boot file.

My thoughts are that maybe:
1) there is some other config script that needs to be run when using disk images from one VAX system (physical 6220) to another (simulated MicroVAX 3900)
2) SimH on Windows 8 does not really support MOP or DECserver stuff?
3) there is some permissions issue with the boot file (sysboot.exe?), but since it is off a disk image (which should be a one-to-one exact copy), how so?

Any ideas?  Thanks in advance._______________________________________________
Simh mailing list
Simh at trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
Simh Info Page - mailman.trailing-edge.com<http://mailman.trailing-edge.com/mailman/listinfo/simh>
mailman.trailing-edge.com
This list is for user discussion of issues related to simh. To see the collection of prior postings to the list, visit the Simh Archives.

Sauf indication contraire ci-dessus:/ Unless stated otherwise above:
Compagnie IBM France
Siège Social : 17 avenue de l'Europe, 92275 Bois-Colombes Cedex
RCS Nanterre 552 118 465
Forme Sociale : S.A.S.
Capital Social : 657.364.587 EUR
SIREN/SIRET : 552 118 465 03644 - Code NAF 6202A
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20160621/5e88f65b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ATT00001.gif
Type: image/gif
Size: 360 bytes
Desc: ATT00001.gif
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20160621/5e88f65b/attachment-0001.gif>