[Simh] VAX sim: rqb address?

[Cory Smelosky]

On Sun, 1 Nov 2015, Mark Pizzolato wrote:

>> Doing that changed it to 760354,
>
> You've got 4 DZV11's in the config.  Did you actually add all of them to the SYSGEN CONFIG?
>

I didn't want a single DZV11 but I was unable to disable them...

>> which is at least a number everything agrees on.
>
> Actually, the boot ROM's display of SHOW DEV that sees DUB at 0760374.  This is only due to the fact that it is at the expected address.  The table which the simulator auto config logic uses is the same table the boot ROM and VMS uses to determine the appropriate addresses.
>
>>>> 200000FC - 200000FF*           4 1 RQB
>>>> 20001468 - 2000146B            4 1 RQ
>>>> 20001920 - 2000192F            4 1 XQ
>>>> 20001940 - 20001943            4 1 TQ
>>>> 20001F40 - 20001F41              1 QBA
>>>>
>>>>
>>>>>>> show dev
>>>> UQSSP Disk Controller 0 (772150)
>>>> -DUA0 (RD54)
>>>> -DUA1 (RD54)
>>>> -DUA2 (RD54)
>>>> -DUA3 (RX50)
>>>>
>>>> UQSSP Disk Controller 1 (760374)
>>>> -DUB0 (RD54)
>>>> -DUB1 (RD54)
>>>> -DUB2 (RD54)
>>>> -DUB3 (RD54)
>>>>
>>>> UQSSP Tape Controller 0 (774500)
>>>> -MUA0 (TK50)
>>>> -MUA1 (TK50)
>>>> -MUA2 (TK50)
>>>> -MUA3 (TK50)
>>>>
>>>> Ethernet Adapter 0 (774440)
>>>> -XQA0 (08-00-2B-AA-BB-CC)
>>>>
>>>>>>> configure
>>>> Enter device configuration, HELP, or EXIT
>>>> Device,Number? rqdx3
>>>> Device,Number? kda50
>>>> Device,Number? tqk50
>>>> Device,Number? delqa
>>>> Device,Number? exit
>>>>
>>>> Address/Vector Assignments
>>>> -774440/120 DELQA
>>>> -772150/154 RQDX3
>>>> -760334/300 KDA50
>>>> -774500/260 TQK50
>>>
>>> I don't know why the boot ROM code SHOW DEV command doesn't list the DZ devices, maybe it is only showing bootable devices.
>>>
>>
>> Hmmm.
>>
>>> - Mark
>>>
>>
>> --
>> Cory Smelosky
>> http://gewt.net Personal stuff
>> http://gimme-sympathy.org Projects
>

-- 
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects