[Simh] how to get eth connexion

[Armistead, Jason]

Gérard

SIMH has a console terminal connection.  This is activated after SIMH starts up by creating a Telnet connection to port 10000 on your host (or else it times out).  That implies that the IP protocol be activated on at least one network interface on your host.

Jason

-----Original Message-----
From: simh-bounces at trailing-edge.com [mailto:simh-bounces at trailing-edge.com] On Behalf Of Gérard Calliet
Sent: Wednesday, 6 November 2013 3:49 AM
To: simh at trailing-edge.com
Subject: [External] Re: [Simh] how to get eth connexion

Le 05/11/2013 13:55, Mark Pizzolato - Info Comm a écrit :
>> 2) I saw we need at least one ip host connexion alive to have a 
>> connexion for
>> >simh - I am on Windows with wincap -. Again, why ?
> I'm not sure exactly what you mean by 'need at least one ip host connexion alive'.  Are you saying that you need to be connected to a network?
Thanks to your help, I was able to communicate using a classic wire connexion. It works also with the only wire interface, used by Windows for ip traffic, and by simh for its (ip also) traffic.
If I disable the ip protocol for the interface, simh also cannot work.
My question is theoretical : why do we need an ip host protocol on the host interface for simh being able of work with this interface ? It's perhaps a window / wincap issue.
Don't worry about it : it is only to increese my knowledge. I do go on with wired and ip-ed solutions.

Gérard Calliet
_______________________________________________
Simh mailing list
Simh at trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh