[Simh] how to get eth connexion

[gerard.calliet at pia-sofer.fr]

Hello,

Thanks for all the answers.
But it doesn't work. I tried with another pc, and on rj45, and I gave a 
specific (dec)Mac address. Same thing.
An idea ?

Gérard Calliet

Le 2013-11-04 08:28, Robert Jarratt a écrit :
> Hello Gérard,
>
> If I have understood you correctly you have given the simulated 
> Ethernet
> interface the same MAC address as the physical interface, although if 
> that
> is right there seems to be a typo in your first email. I would 
> definitely
> give SIMH a unique MAC address that is not already on your network.
>
> Additionally, although I suspect it may not make a difference, it 
> might be
> best to use a DEC MAC address in your SIMH config, DEC MACs start 
> with
> 08-00-2B.
>
> Regards
>
> Rob
>
>> -----Original Message-----
>> From: simh-bounces at trailing-edge.com [mailto:simh-bounces at trailing-
>> edge.com] On Behalf Of Gérard Calliet
>> Sent: 04 November 2013 06:50
>> To: simh at trailing-edge.com
>> Subject: Re: [Simh] how to get eth connexion
>>
>> Hi Mark,
>>
>> Thanks for your answer.
>>
>> I tried the simh 4.0 beta. It's still not working.
>> I join show ethernet result, ipconfig/all result, my ucx config, the 
>> init
> file.
>> I choosed the right eth (eth0 is the active wifi interface on 
>> windows).
>> I gave its mac address as interf mac address in the simh init file.
>>
>> I don't understand where is the problem. I am just a beginner on 
>> simh, so
> I
>> could have done some error, but I don't see what it is.
>>
>> Gérard Calliet
>> pia-sofer
>>
>> Le 04/11/2013 00:37, Mark Pizzolato - Info Comm a écrit :
>> > On Sunday, November 03, 2013 at 2:47 PM, Gérard Calliet wrote:
>> >> Hello,
>> >>
>> >> I am a beginer on simh. I have tried a lot of thing to get 
>> connected
>> >> by ethernet, on simh 3.9 openvms 7.3, openvms 7.0, vms 5.5 ... / 
>> ucx
>> >> 4.0 I have instaled wincap on a Windows Seven I cannot get any
>> >> connexion
>> > Hi Gérard,
>> >
>> > Try using the latest simh binaries from
>> > https://github.com/simh/Win32-Development-Binaries/blob/Win32-
>> Developm
>> > ent-Binaries/simh-4.0-Beta--2013-10-02-5feb20d0.zip
>> >
>> > Alternatively, if you've got a Visual Studio environment (or 
>> MinGW)
>> > available, you can build from the latest sources available from:
>> > https://github.com/simh/simh/archive/master.zip
>> >
>> >
>> > If you are still having problems, provide the output of "SHOW 
>> ETHERNET"
>> from a "sim>" prompt along with the output of IPCONFIG/ALL from a
>> Windows command prompt, and explain what makes you think that the
>> ethernet is not working.
>> >
>> > Good Luck.
>> >
>> > - Mark
>> >