[Simh] Problems Booting VAX Emulation on Raspberry Pi
Mark Pizzolato - Info Comm
Mark at infocomm.com
Sat Sep 8 08:16:41 EDT 2012
Hi Rob,
You don't show much detail about what your vax780.ini file looks like.
The "%BOOT-F-Unable to locate BOOT file" message is being issued by the code from vmb.exe. This would suggest to me that the disk image you are trying to boot from has somehow gotten corrupted. I'd pull that image off the raspberry to an environment where you have a working simulator and attach the disk image as an additional disk on that simulator and use then look around at the details of the contents.
Good Luck.
- Mark
From: simh-bounces at trailing-edge.com [mailto:simh-bounces at trailing-edge.com] On Behalf Of Rob Jarratt
Sent: Saturday, September 08, 2012 2:03 AM
To: simh at trailing-edge.com
Subject: [Simh] Problems Booting VAX Emulation on Raspberry Pi
I have had the 780 emulation running on my Raspberry Pi for some time now. Recently I have had intermittent problems with vmb.exe, the problem seems to have become permanent now though. I have re-copied vmb.exe to the machine but the problem persists. Here is the log:
pi at raspberrypi:~$ sudo ./vax780
VAX780 simulator V3.9-0
libpcap version 1.1.1
Eth: opened OS device eth0
Debug output to "STDOUT"
Loading boot code from vmb.exe
%BOOT-F-Unable to locate BOOT filesim> q
Goodbye
Eth: closed eth0
Debug output disabled
The error about being unable to locate the BOOT file happens about 40 seconds after the "Loading boot code from vmb.exe" message.
Any ideas?
Regards
Rob
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20120908/e3838655/attachment-0002.html>
More information about the Simh
mailing list