[Simh] prolific usb/serial pl2303 for windows7 32bits

[gilberto dos santos alves]

since last year my old cable usb  ca50 [Prolific Technology, Inc.],
that works 24x7x365 since 2007 thru 2011, using an old nokia phone does not
work on windows7 32bits ultimate.
after lots of patches, sites, downloads, regedits, etc it do not works more.
this year  i use this on linux debian / ubuntu and every works well.
question: how do i compile sources to it work agian in windows 7 again?
following are results of linux command dmesg and lsusb -vv -d 067b:2303
---------------------------------------------------
dmesg
[21594.132025] usb 2-2: new full speed USB device using ohci_hcd and
address 3
[21594.344904] usb 2-2: New USB device found, idVendor=067b, idProduct=2303
[21594.344909] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[21594.344914] usb 2-2: Product: USB-Serial Controller
[21594.344917] usb 2-2: Manufacturer: Prolific Technology Inc.
[21594.345066] usb 2-2: configuration #1 chosen from 1 choice
[21595.280174] usbcore: registered new interface driver usbserial
[21595.280198] USB Serial support registered for generic
[21595.280233] usbcore: registered new interface driver usbserial_generic
[21595.280234] usbserial: USB Serial Driver core
[21595.307046] USB Serial support registered for pl2303
[21595.307077] pl2303 2-2:1.0: pl2303 converter detected
[21595.338975] usb 2-2: pl2303 converter now attached to ttyUSB0
[21595.339005] usbcore: registered new interface driver pl2303
[21595.339008] pl2303: Prolific PL2303 USB to serial adaptor driver
---------------------------------------------------
lsusb
Bus 002 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
Port
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x067b Prolific Technology, Inc.
idProduct 0x2303 PL2303 Serial Port
bcdDevice 3.00
iManufacturer 1 Prolific Technology Inc.
iProduct 2 USB-Serial Controller
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
---------------------------------------------------

thanks for any help

-- 
gilberto dos santos alves
+55.11.98646-5049
são paulo - sp - brasil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20121029/88fe5cf2/attachment.html>