[Simh] simh

[bob]

Drforbin <drforbin6 at ...> writes:

> 
> I have been using simh now for quite some time.
> I just ran into a problem...
> Could you please explain to me how to enable greater than 8 dz11 lines 
> on pdp-10...
> I used the set dz lines=32 and after 8 lines I get no response...thank 
> you...
> 
> Merlyn.
> 


DZ11 is only 8 lines, you would need to install an additional DZ to get each
group of 8 additional lines.
I don't know if you can do that with SMIH, but would like to know!!