[Simh] Ethertnet problem with decnet on rsx11m plus.
Mancausoft
andreamilazzo at mancausoft.org
Mon Aug 29 19:26:41 EDT 2011
I have a image of RSX-11M-PLUS V4.6 with decnet.
I try to use on simh but XQ an XU don't work.
simh config:
set cpu 11/94 1M
SET CPU IDLE
set console TELNET=12323
SET XQ disable
SET XU enable
attach XU eth0
set rq0 ra92
attach rq0 rsx11mpbl87.dsk
boot rq0
Error:
>NCP SET EXE STA ON
Event type 2.0, Local node state change
Occurred 29-AUG-11 19:22:25 on node 5.10 (MARVIN)
Reason for state change: Operator command, Old node state = Off
New node state = On
Event type 5.13, Initialization failure
Occurred 29-AUG-11 19:22:45 on node 5.10 (MARVIN)
Line UNA-0
I try to use the same image with e11 and:
>NCP SET EXE STA ON
Event type 2.0, Local node state change
Occurred 29-AUG-11 19:25:55 on node 5.10 (MARVIN)
Reason for state change: Operator command, Old node state = Off
New node state = On
Event type 4.10, Circuit up
Occurred 29-AUG-11 19:25:56 on node 5.10 (MARVIN)
Circuit UNA-0
--
Mancausoft - http://www.mancausoft.org/
GPG key: B53F90F2
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20110830/1005e23c/attachment.sig>
More information about the Simh
mailing list