[Simh] EXTERNAL: Question about changing the simulator from a VAXserver 3900 to a MicroVAX 3900
Hittner, David T (IS)
david.hittner at ngc.com
Wed Sep 22 07:18:15 EDT 2010
You can use a hex editor to change byte 4 in ka655x.bin from 2 to 1.
Dave
From: simh-bounces at trailing-edge.com [mailto:simh-bounces at trailing-edge.com] On Behalf Of norman lastovica
Sent: Wednesday, September 22, 2010 5:37 AM
To: simh at trailing-edge.com
Subject: EXTERNAL:[Simh] Question about changing the simulator from a VAXserver 3900 to a MicroVAX 3900
Within http://simh.trailing-edge.com/pdf/simh_faq.pdf <http://simh.trailing-edge.com/pdf/simh_faq.pdf> ( SIMH FAQ 07-Sep-2005) there is an example of how to change the firmware to indicate that the emulated system is a microvax (vs a vaxserver) as follows:
4.6 How do I change the simulator from a VAXserver 3900 to a MicroVAX 3900?
The system type is controlled by a "magic byte" in the CPU's boot ROM. By default, the system type is a VAXserver 3900. To change the type to a MicroVAX 3900, patch the boot ROM as follows:
sim> set ptr ena
sim> att ptr ka655x.bin
sim> ie ptr 4
4: 2 1
sim> det ptr
and reboot the simulated VAX.
With 3.8-1 this sequence doesn’t work. Is there a new way of doing this?
Thanks!
norm
--
Oracle <http://www.oracle.com/>
Norman Lastovica | Senior Managing Engineer
Phone: +17193396749 <tel:+17193396749>
Oracle Development
9500 County Road 175 | Salida, Colorado 81201
Green Oracle <http://www.oracle.com/commitment>
Oracle is committed to developing practices and products that help protect the environment
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20100922/1c176bb1/attachment-0002.html>
More information about the Simh
mailing list