[Simh] Errors when using pUTTY terminal emulator to telnet to simh.
eabreu at rdmetal.ulg.ac.be
eabreu at rdmetal.ulg.ac.be
Fri May 29 06:45:39 EDT 2009
"Rey Leonar" <raleonar at gmail.com> on Fri, 29 May 2009 09:18:01 +0800 wrote :
>Thank you guys for the response.
>
>I'm playing around with different settings of several terminal emulator to
>act as console for my SIMH. And this is my observation....
>
> ..... so far only only those emulators that has MULTILANGUAGE SUPPORT
>will work fine as console for my SIMH. Like POWERTERM and TERATERM. I don't
>know why but every time I used this emulators for VAX SIMH it will response
>to SIMH command and ask for type of language used in the console before it
>start the SYSTEM TEST.
>
>same as this....
>
>
>
>Connected to the VAX simulator
>
>
>
>KA655-B V5.3, VMB 2.7
> 1) Dansk
> 2) Deutsch (Deutschland/Österreich)
> 3) Deutsch (Schweiz)
> 4) English (United Kingdom)
> 5) English (United States/Canada)
> 6) Español
> 7) Français (Canada)
> 8) Français (France/Belgique)
> 9) Français (Suisse)
>10) Italiano
>11) Nederlands
>12) Norsk
>13) Português
>14) Suomi
>15) Svenska
> (1..15):5
>
>Performing normal system tests.
>40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
>24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
>08..07..06..05..04..03..
>Tests completed.
>>>>
>
>
>Unlike in Putty and Eterm32Plus, which has NO MULTILANGUAGE SUPPORT it will
>display this error....
>
>Connected to the VAX simulator
>
>
>?C6 2 01 FF 00 0000
>
>P1=00000000 P2=00000000 P3=00000000 P4=00000000 P5=00000000
>P6=00000000 P7=00000000 P8=00000000 P9=00000000 P10=00000000
>r0=00000080 r1=00000020 r2=00000000 r3=201407A4 r4=2004D2F0
>r5=2004D310 r6=2004D312 r7=00000000 r8=00000000 ERF=80000000
>
>KA655-B V5.3, VMB 2.7
>
>Performing normal system tests.
>40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
>24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
>08..07..06..05..04..03..
>
>Normal operation not possible.
>
>>>>6c
>
>I believe this could be a bug in SIMH.
>
>
>-rey
Hello,
Following this thread, I did some playing around with PuTTY settings, and
this setup is working for me :
- in category "Session", use connection type = "raw" instead of telnet
- in category "Terminal", "Line discipline options",
set "Local echo" and "Local line editing" to "Force off"
I get some gibberish on the first line, before the message
Connected to the VAX simulator
but after that everything works fine!
all tests pass, VMS boots and "set terminal" identifies it as a VT102...
--
Eduardo Abreu
More information about the Simh
mailing list