<div dir="ltr">I'm having errors attaching the XQ controller to eth0.<div>Note: I'm using Debian Jessie.</div><div><br></div><div>I also had problems when trying to make the simh targets.  I got an error from the make file about statically linking against libpcap.</div><div>I...removed the check from the makefile and built it anyways.  Did I do a bad, bad thing?</div><div><br></div><div>I am going to go back and find Toby Thain's write-up as another user suggested and see where that gets me.</div><div><br></div><div>Now...as to Open VMS itself.  We have one production machine.  A MicroVAX 3100-90 running OpenVMS 5.5-2.  It's using the CMUIP stack for communicating on our network.</div><div>That machine is all we have licenses for.  Thus we do not have licenses for any of the hobbyist stuff, DEC IP, etc.</div><div><br></div><div>We have CD images for OpenVMS 6.1 and 7.1, but no licenses for them.  The plan is use the OpenVMS 6.1 install CD to boot to Stand-Alone backup.  An image backup save_set of the MicroVAX system disk will made on the MicroVAX and uploaded to the Linux machine.  I'll use mkisofs in Linux to create a CD image of the save set.  The OpenVMS 6.1 Stand-Alone backup will use used to restore the MicroVAX save_set to a simh disk.  Then reboot simh from that disk.  Hopefully we should be good to go (pending any reconfigure/AUTOGEN issues).</div><div><br></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Mar 3, 2016 at 2:48 PM, Mark Pizzolato <span dir="ltr"><<a href="mailto:Mark@infocomm.com" target="_blank">Mark@infocomm.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div lang="EN-US" link="blue" vlink="purple"><div><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Hi Joshua,<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Please elaborate the details of your networking problems with the simh VAX.<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">You should be able to build a vanilla VMS install on simh using the Hobbyist pieces of BOTH VMS and either the DEC IP stack or MultiNet and use that system as your import export tool.  That system will absolutely no issues mounting simh disk images or running backup to restore your saveset to a different simh disk.<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"><u></u> <u></u></span></p><p><u></u><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"><span>-<span style="font:7.0pt "Times New Roman"">          </span></span></span><u></u><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d">Mark<u></u><u></u></span></p><p class="MsoNormal"><a name="-1106297919__MailEndCompose"><span style="font-size:11.0pt;font-family:"Calibri",sans-serif;color:#1f497d"><u></u> <u></u></span></a></p><div style="border:none;border-left:solid blue 1.5pt;padding:0in 0in 0in 4.0pt"><div><div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in"><p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span style="font-size:11.0pt;font-family:"Calibri",sans-serif"> Simh [mailto:<a href="mailto:simh-bounces@trailing-edge.com" target="_blank">simh-bounces@trailing-edge.com</a>] <b>On Behalf Of </b>Joshua Overmiller<br><b>Sent:</b> Thursday, March 3, 2016 6:36 AM<br><b>To:</b> <a href="mailto:simh@trailing-edge.com" target="_blank">simh@trailing-edge.com</a><br><b>Subject:</b> [Simh] Mounting simh disk files in Linux<u></u><u></u></span></p></div></div><div><div class="h5"><p class="MsoNormal"><u></u> <u></u></p><div><div><p class="MsoNormal">I've built the ods2 tool and ods2reader from <a href="http://www.vms2linux.de/" target="_blank">http://www.vms2linux.de/</a> in order to try to read the simh disk files.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">However, trying "ods2 mount d0.dsk" responds with "Mount failed with 2312".<u></u><u></u></p></div><div><p class="MsoNormal">Trying "ods2reader -l d0:[000000]"  gives:<u></u><u></u></p></div><div><p class="MsoNormal">    d0:[000000] -- Bad block in file<u></u><u></u></p></div><div><p class="MsoNormal">    d0:[000000] --- Cant't read index file header on d0<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">d0.dsk corresponds to DAU0 which is a RA92 disk.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">Note there were some warnings when building both tools, but they both build.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">For ods2:<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><div><p class="MsoNormal">ods2.c: In function ‘main’:<u></u><u></u></p></div><div><p class="MsoNormal">ods2.c:1165:13: warning: ‘gets’ is deprecated (declared at /usr/include/stdio.h:638) [-Wdeprecated-declarations]<u></u><u></u></p></div><div><p class="MsoNormal">             if (gets(str) == NULL) break;<u></u><u></u></p></div></div><div><div><p class="MsoNormal">ods2.o: In function `main':<u></u><u></u></p></div><div><p class="MsoNormal">ods2.c:(.text.startup+0x2d5): warning: the `gets' function is dangerous and should not be used.<u></u><u></u></p></div></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">For ods2reader:<u></u><u></u></p></div><div><p class="MsoNormal">Various warnings about implicit declaraions of builtin functions strlen, strcpy, and strcat.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">More info to follow to get some insight into what my plans are.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">My end goal is to migrate a physical MicroVAX 3100-90 VMS 5.5 system to simh.<u></u><u></u></p></div><div><p class="MsoNormal">I've been playing around with learning the BACKUP utility and Stand-Alone BACKUP under simh before I try anything out on the real system.  I can make an image backup of the system disk to a SAVE_SET on another disk.  The MicroVAX has the CMUIP installed so I can FTP the SAVE_SET off onto our network.  I plan to write the SAVE_SET to an iso image for simh VAX to mount and copy to a local disk.  I will then use BACKUP to restore the save set to a local disk.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">I will also want to get some files off the simh VAX.  Hence the need to mount the simh disk image files.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">I'm struggling with getting the networking running in simh, so I'm looking into this route.  However, other suggestions for getting files out of the simh disk image files are welcome.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">Thanks,<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">Josh<u></u><u></u></p></div><div><p class="MsoNormal">.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div></div></div></div></div></div></div></blockquote></div><br></div>