<div dir="ltr"><div>The /730 was configured with 5 MB, a UDA50, a DZ11, and a DEUNA.  It suffers from the same kernel issue described above for the /750, so I really haven't done any significant testing at all other than confirming that the system comes up to multiuser and I can run basic commands.<br><br></div>-Henry</div><div class="gmail_extra"><br><div class="gmail_quote">On 23 June 2015 at 22:21, Ethan Dicks <span dir="ltr"><<a href="mailto:ethan.dicks@gmail.com" target="_blank">ethan.dicks@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span class="">On Tue, Jun 23, 2015 at 7:06 PM, Henry Bent <<a href="mailto:hbent@oberlin.edu">hbent@oberlin.edu</a>> wrote:<br>
> Out of curiosity I tried Ultrix 4.3 and 4.5 on the /750, both with genvmunix<br>
> and a custom kernel, and both showed the problem.  Whatever the issue here<br>
> is, it appears to never have been fixed.  I tried disabling just about every<br>
> device I could save for the disk, and I still got a panic every time.  The<br>
> only thing I haven't yet tried is using a different disk controller (than<br>
> the UDA50).<br>
<br>
</span>Definitely try a different disk.  UNIX device drivers do not use the<br>
hardware the same way that VMS drivers do.  I helped debug the Simh<br>
RP03 driver long ago because it wouldn't fully boot 2.9BSD (long story<br>
short is that it was because the BSD driver wrote to a read-only<br>
register to initiate an interrupt for device probing).  I've also run<br>
into issues with 4.3BSD not booting an 11/730 with RB80 (I did narrow<br>
it down to specific lines of code in the rb.c driver but haven't<br>
figured out what's not happening right.  It's *very* early in the boot<br>
sequence that things go off the rails, so it wasn't too hard to trace<br>
in the code).<br>
<span class=""><br>
> Interestingly, Ultrix 4.0 will boot on a /730 if you make a custom kernel<br>
> (genvmunix is too big).  I didint' try 4.3 or 4.5.<br>
<br>
</span>Huh.  I haven't tried that.  Interesting.  Which disk?  UDA50 or the<br>
IDC + RB80?  (DU driver vs DQ driver in VMS terms)<br>
<span class="HOEnZb"><font color="#888888"><br>
-ethan<br>
</font></span></blockquote></div><br></div>