<p dir="ltr"><br>
On Apr 30, 2015 1:46 PM, Clem Cole <clemc@ccc.com> wrote:<br>
><br>
><br>
> On Thu, Apr 30, 2015 at 4:20 PM, Rich Alderson <simh@alderson.users.panix.com> wrote:<br>
>><br>
>> Striping came along with redundant arrays of<br>
>> inexpensive disks.  At $50,000 a drive, RP07s were not candidates. ;-)<br>
><br>
><br>
> ​Rich,<br>
><br>
> Be careful here with that sort of statement.   Striping as a technology predates RAID and certainly could have been used by large commercial systems if people had wanted too.   Supercomputers like Crays and CDC, as well as the "mini-crays" like Convex and even the "Crayolla" (Stellar) all striped with very expensive 19" technology in the late 1970s and 1980s.<br>
><br>
> You are correct, that striping as a popular technique does not go mainstream until the 3.5" technology where the cost per byte got low enough that "anyone" could afford it - i.e. when the idea of RAID shows up.</p>
<p dir="ltr">Actually, even before low cost 3.5" drives were available, RAID was an industry acronym, but in those days it came from Redundant Array of Independent Disks.</p>
<p dir="ltr">VMS Volume Shadowing and then the Stripe Driver implemented RAID 1 and RAID 0 respectively.</p>
<p dir="ltr">- Mark</p>