I'm a first time user of this SIMH.<br> <br>Just recently installed the latest version on SIMH (3.8-1). on my laptop running XP sp3. I'm using the VAX emulator and successfully installed VAX/VMS ver 5.3. It runs smoothly on my laptop except that I don't like the built-in console terminal.<br>
<br>So I tried using Putty to telnet to SIMH as my console terminal, a little change on the openvms.ini, just uncomment <br>"set console telnet=6969" and when SIMH run, it will just wait for a telnet session before the SIMH start to boot.When my Putty connects to SIMH the following message appear and I can't successfuly boot to DUA0, it looks like its hanging...<br>
<br>This is the message displayed on my Putty terminal emulator....<br>
<br>
.<br>
.<br>
.<br>
Connected to the VAX simulator<br>
<br>
<br>
<br>
?C6 2 01 FF 00 0000<br>
<br>
P1=00000000 P2=00000000 P3=00000000 P4=00000000 P5=00000000<br>
P6=00000000 P7=00000000 P8=00000000 P9=00000000 P10=00000000<br>
r0=00000080 r1=00000020 r2=00000000 r3=201407A4 r4=2004D2F0<br>
r5=2004D310 r6=2004D312 r7=00000000 r8=00000000 ERF=80000000<br>
<br>
<br>
KA655-B V5.3, VMB 2.7<br>
Performing normal system tests.<br>
40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..<br>
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..<br>
08..07..06..05..04..03..<br>
Normal operation not possible.<br>
<br>
.<br>
.<br>
<br>
I'd tried again another terminal emulator. Eterm32 Plus, but still same
message displayed as in Putty.BUT...when I used again another emulator,
TeraTerm, ITS WORKING FINE. everything then is OKAY.<br>
<br>
I just wondering what specific settings on Putty or the Eterm32Plus,
that triggers the error in Siimh, and which is not in the TERA TERM.
I'd already tried to compare the settings of those emulators but so far
I was not successful to make the PUTTY or the ETERM32 work with simh.<br><br>Do you guys have similar experience like this?<br><br><br>rey<br>