[Simh] MicroVAX 2000 simulator
John Welsh
johnwelsh at optusnet.com.au
Sun Nov 17 02:02:59 EST 2019
Hi Ray,
I believe it is. B MU0 or B DU0
Also from the >>> prompt. T 50
ls the equivalent of SHO DEV on later VAX
models.
Cheers.
Sent from my iPhone
> On 17 Nov 2019, at 15:38, Ray Jewhurst <raywjewhurst at gmail.com> wrote:
>
> So I found out that it takes the normal DUA and MUA but I believe there is something wrong with the tape emulation. When I go to boot I get this (also here is my whole boot sequence.):
>
> MicroVAX 2000 (KA410) simulator V4.0-0 Current git commit id: bdc677b7
> /home/ray/Emulation/DEC/VAX/Systems/MicroVAX_2000/v5.3/vms.ini-1> att nvr nvr.bin
> NVR: buffering file in memory
> /home/ray/Emulation/DEC/VAX/Systems/MicroVAX_2000/v5.3/vms.ini-17> at rz1 -v 2of2.tap
> Tape Image '2of2.tap' scanned as SIMH format.
> contains 28488848 bytes of tape data (7018 records, 185 tapemarks)
> /home/ray/Emulation/DEC/VAX/Systems/MicroVAX_2000/v5.3/vms.ini-18> boot
> Loading boot code from internal ka410.bin
>
>
>
> KA410-A V2.3
>
> F_..E...D...C?..B...A...9...8...7...6...5...4_..3_..2_..1_..
>
>
> ?? C 0080 0000.0004
> \
> >>> boot mua0
>
>
> -MUA0
> TVBTDRIVER halting at relative address 04FC TVBTDRIVER base addr = 000017A0
> REGISTERS R0: 00000001 R1: 00000081 R2: 00000000 R3: 00000076
> R4: 000061AC R5: FFFFFFFF R6: 0000000B R7: 200C0080
> R8: 000001B0 R9: 00000000 R10: 00007000 R11: FFFFFFFF
> AP: 00006F28 FP: 00006EEC SP: 00006EE4 PC: 00001C9C
> CMDBUF: 00000002 00000806 SENSE_BUF: 00000000 00000000
> STATUS_BUF: 00 SENSE_STATUS: FF
> MSG_IN_BUF: 00 SENSE_MSG_IN: 00 SENSE_INDEX: FFFFFFFF
> CUR_POS: 00000000 DESIRED_POS: 00000000 TM_TO_SKIP: 00000000
> TM_SKIPPED: 00000000 SPACE_COUNT: 00000000 TM_ADDER: 00000000
> USER_BUF_ADDR: 00007000 USER_BUF_LEN: 00000200 BYTES_LEFT_TO_READ: 000001B0
> PG_TABLE_PTR: 00000000 BASE_VPN: 00000038 BUFFER_PTR: 00007050
> MAP_MODE: 00000000
> STACK: 0000172B
> 0000000A
> 00000000
> 2FFC0000
> 00006F5C
> 00006F48
>
> HALT instruction, PC: 00002B3C (BSBW 5D70)
> sim>
>
> I have tried it with both 5.3 and 5.5-2H4 with no luck. I know the 2H4 image is good because I used it to do an install on the 3900.
>
> And here's my config file:
>
> att nvr nvr.bin
> set rd0 enable
> set rd1 enable
> set rd2 enable
> set rd0 rd54
> set rd1 rd54
> set rd2 rx33
> set rz1 tzk50
> set rz2 dis
> set rz3 dis
> set rz4 dis
> set rz5 dis
> set rz6 dis
> set rz7 dis
> at rd0 d0.dsk
> at rd1 d1.dsk
> at rz1 -v 2of2.tap
> boot
>
> Any more advice (and I know I've asked for a lot) would be appreciated.
>
> Thanks,
>
> Ray
>
>
>> On Sat, Nov 16, 2019 at 9:35 PM Ray Jewhurst <raywjewhurst at gmail.com> wrote:
>> Mark,
>> Nope. This is what I get:
>>
>> >>> show dev
>>
>> ?18 INV DGT
>> >>>
>> I am running the latest build btw.
>>
>> Thanks
>>
>> Ray
>>
>>> On Sat, Nov 16, 2019 at 9:32 PM Mark Pizzolato <Mark at infocomm.com> wrote:
>>> I would start with a SHOW DEV when you get to the >>> prompt.
>>>
>>>
>>>
>>> From: Simh [mailto:simh-bounces at trailing-edge.com] On Behalf Of Ray Jewhurst
>>> Sent: Saturday, November 16, 2019 6:30 PM
>>> To: simh <simH at trailing-edge.com>
>>> Subject: [Simh] MicroVAX 2000 simulator
>>>
>>>
>>>
>>> I have decided to try out the MicroVAX 2000 simulator running VMS 5.5-2H4 off a TK50. Problem is, I don't know VAX/VMB names for the RD disk drive or the TZK50 SCSI tape drive. Any help would be appreciated.
>>>
>>>
>>>
>>> Thanks,
>>>
>>>
>>>
>>> Ray
>>>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20191117/75167310/attachment.html>
More information about the Simh
mailing list