[Simh] VAXstation 4000/VLC Boot Failure
mark at wickensonline.co.uk
mark at wickensonline.co.uk
Sat May 4 18:03:00 EDT 2019
Final try for this evening - I installed VAX/VMS 7.3 which went fine. I then
installed DW Motif 125 with license. I get a crash on DW Motif startup. I
tried this with Matt's build of /VLC, and then my build, and then the latest
beta 4.0 binaries.
**** Fatal BUG CHECK, version = V7.3 DECWINDOWS, DECwindows fatal error
Crash CPU: 00 Primary CPU: 00
Active/available CPU masks: 00000001/00000001
Current process = DECW$SERVER_0
Register dump
R0 = 81945200
R1 = 002D78F8
R2 = FFFFFFFF
R3 = 81236C00
R4 = 8193B0C0
R5 = 8190CD80
R6 = 00000001
R7 = 8190CF60
R8 = 8193B978
R9 = 0000003A
R10= 0000003B
R11= 08040000
AP = 7FF79CC0
FP = 7FFE77E4
SP = 7FFE77B8
PC = 81943DDF
PSL= 00D50009
Kernel/interrupt/boot stack
7FFE77C0 7FFD3E50
7FFE77C4 00000002
7FFE77C8 818FE5EC
7FFE77CC 818FE5C0
7FFE77D0 81942F12
7FFE77D4 00000002
7FFE77D8 8190CD80
7FFE77DC 8193BC4F
7FFE77E0 815884F8
7FFE77E4 00000000
7FFE77E8 00000000
7FFE77EC 7FF79CA4
7FFE77F0 7FF79C68
7FFE77F4 8151E860
7FFE77F8 7FFEDFCE
7FFE77FC 03C00000
Exec stack
Process privileges
81FEA600 17118805
81FEA604 00000020
Image name = MIMA$DKA0:[SYS0.SYSCOMMON.][SYSEXE]DECW$SERVER_MAIN.EXE;1
Loaded images
[SYSMSG]SYSMSG.EXE 813DD400 81423E00
[SYS$LDR]SYSLDR_DYN.EXE 81781200 81783200
[SYS$LDR]DDIF$RMS_EXTENSION.EXE 81783600 81784800
[SYS$LDR]RECOVERY_UNIT_SERVICES.EXE 81784A00 81785200
[SYS$LDR]RMS.EXE 81424000 81450A00
SYS$NTA.EXE 814A1200 814A1400
VAXCLUSTER_CACHE.EXE 814A1800 814A6400
SYS$NETWORK_SERVICES.EXE 814A6A00 814A6C00
SYS$UTC_SERVICES.EXE 814A7200 814A8000
SYS$TRANSACTION_SERVICES.EXE 814A8600 814B6400
SYS$IPC_SERVICES.EXE 814B6800 814D4800
CPULOA.EXE 814D4A00 814D9E00
LMF$GROUP_TABLE.EXE 814DC200 814DDC00
SYSLICENSE.EXE 814DE000 814E1200
F11BXQP.EXE 814E1600 81500E00
SNAPSHOT_SERVICES.EXE 81501600 81502200
SYSGETSYI.EXE 81502800 81504800
SYSDEVICE.EXE 81504C00 81507600
MESSAGE_ROUTINES.EXE 81507C00 8150DE00
EXCEPTION.EXE 8151E400 81528C00
LOGICAL_NAMES.EXE 81529400 8154CC00
SECURITY.EXE 8154D600 81557000
LOCKING.EXE 81557800 8155E600
PAGE_MANAGEMENT.EXE 8155F000 81569000
WORKING_SET_MANAGEMENT.EXE 81571E00 81577C00
IMAGE_MANAGEMENT.EXE 81578600 8157BC00
EVENT_FLAGS_AND_ASTS.EXE 8157C200 8157E400
IO_ROUTINES.EXE 8157EE00 8158F400
PROCESS_MANAGEMENT.EXE 81590E00 8159E800
ERRORLOG.EXE 81772A00 81773600
PRIMITIVE_IO.EXE 81773C00 81774E00
SYSTEM_SYNCHRONIZATION_UNI.EXE 81775200 81779600
SYSTEM_PRIMITIVES_MIN.EXE 81779C00 8177DA00
**** Starting memory dump, writing dump to unit number 0
**** Dump file too short for full dump, attempting subset dump
Header and error log buffers dumped...
SPT & GPT dumped...
System space dumped...
Global pages dumped...
DECW$SERVER_0 dumped...
AUDIT_SERVER dumped...
LANACP dumped...
STARTUP dumped...
IPCACP dumped...
ERRFMT dumped...
OPCOM dumped...
JOB_CONTROL dumped...
SECURITY_SERVER dumped...
TP_SERVER dumped...
DECW$STARTUP dumped...
**** Memory dump complete, dump written to unit number 0
83 BOOT SYS
From: mark at wickensonline.co.uk <mark at wickensonline.co.uk>
Sent: 04 May 2019 21:44
To: 'simh' <simh at trailing-edge.com>
Subject: RE: VAXstation 4000/VLC Boot Failure
OK, so I only got a little further. I tried Matt's prebuilt binary for /VLC
and one that I built locally and get the same result:
-DKA400
VAX/VMS Version V5.5-2H4 Major version id = 1 Minor version id = 0
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM) 04-MAY-2019 21:41
Configuring devices . . .
Available device DKA0: device type RZ24
Available device DKA100: device type RZ24
Available device DKA400: device type RZ24
%BACKUP-I-IDENT, Stand-alone BACKUP V5.5-2; the date is 4-MAY-2019
21:41:47.79
$ backup dka400:VMS2H4055.b/save dka0:
%SYSTEM-F-INTDIV, arithmetic trap, integer divide by zero at PC=0001E2C6,
PSL=03C00002
If you do not want to perform another standalone BACKUP operation,
use the console to halt the system.
If you do want to perform another standalone BACKUP operation,
ensure the standalone application volume is online and ready.
Enter "YES" to continue:
Regards, Mark.
From: mark at wickensonline.co.uk <mailto:mark at wickensonline.co.uk>
<mark at wickensonline.co.uk <mailto:mark at wickensonline.co.uk> >
Sent: 04 May 2019 21:30
To: 'simh' <simh at trailing-edge.com <mailto:simh at trailing-edge.com> >
Subject: RE: VAXstation 4000/VLC Boot Failure
OK
So I found a 5.5.2-H4 Installation CD and that appears to work.
Sorry for wasting your collective time!
Mark.
From: mark at wickensonline.co.uk <mailto:mark at wickensonline.co.uk>
<mark at wickensonline.co.uk <mailto:mark at wickensonline.co.uk> >
Sent: 04 May 2019 21:17
To: 'simh' <simh at trailing-edge.com <mailto:simh at trailing-edge.com> >
Subject: RE: VAXstation 4000/VLC Boot Failure
Just an update - I tried the 7.3 VAX/VMS CD and it did boot OK.
I'll try and find some alternative versions of 5.5 - I know there was a
hardware release to support the /60 and /90, maybe I'm not using the right
CD here.
Regards, Mark.
From: mark at wickensonline.co.uk <mailto:mark at wickensonline.co.uk>
<mark at wickensonline.co.uk <mailto:mark at wickensonline.co.uk> >
Sent: 04 May 2019 17:18
To: 'simh' <simh at trailing-edge.com <mailto:simh at trailing-edge.com> >
Subject: VAXstation 4000/VLC Boot Failure
Probably one for Matt, but I'm sure the answer will be useful across the
list.
I am trying to get the vax48.exe VAXstation 4000/VLC windows executable
supplied by Matt to boot a VAX/VMS 5.5.2 image, and have experienced a
crash. Looking for help.
I've attached my simh.ini file and the simulator trace output below:
%<----------<%----------%<----------<%----------%<----------<%----------%<--
--------<%----------
set async
set cpu 104m
; Attach non-volatile RAM to a file
attach nvr c:\vax\mima\vaxstation4000vlc.nvr
set rz0 rz24
attach rz0 c:\vax\mima\mima-dka0-system.vdisk
set rz1 rz24
attach rz1 c:\vax\mima\mima-dka100-vms-pageswap.vdisk
set rz2 disable
set rz3 disable
set rz4 rz24
; Attach the CD-ROM to its file (read-only)
attach -r rz4 c:\vax\data\OpenVMS-VAX-5_5_2-Remastered.iso
set rz5 disable
set rz7 disable
attach xs eth2
set cpu idle=VMS
set cpu conhalt
set console brk=10
;set console telnet=10024
; Now start the emulator
boot cpu
exit
%<----------<%----------%<----------<%----------%<----------<%----------%<--
--------<%----------
C:\vax\mima>vax48.exe
VAXstation 4000-VLC (KA48) simulator V4.0-0 Current git commit id:
8c8e7496
C:/vax/mima/simh.ini-15> attach nvr c:\vax\mima\vaxstation4000vlc.nvr
NVR: buffering file in memory
C:/vax/mima/simh.ini-18> attach rz0 c:\vax\mima\mima-dka0-system.vdisk
RZ0: 'c:\vax\mima\mima-dka0-system.vdisk' Contains ODS2 File system
RZ0: Volume Name: ALEPHSYSTEM Format: DECFILE11B Sectors In Volume:
6976375
C:/vax/mima/simh.ini-21> attach rz1
c:\vax\mima\mima-dka100-vms-pageswap.vdisk
RZ1: 'c:\vax\mima\mima-dka100-vms-pageswap.vdisk' Contains ODS2 File system
RZ1: Volume Name: BUBBLEPAGING Format: DECFILE11B Sectors In Volume:
311200
C:/vax/mima/simh.ini-29> attach -r rz4
c:\vax\data\OpenVMS-VAX-5_5_2-Remastered.iso
RZ4: unit is read only
RZ4: 'c:\vax\data\OpenVMS-VAX-5_5_2-Remastered.iso' Contains ODS2 File
system
RZ4: Volume Name: VMS2055 Format: DECFILE11B Sectors In Volume:
400176
C:/vax/mima/simh.ini-34> attach xs eth2
WinPcap version 4.1.3 (packet.dll version 4.1.0.2980), based on libpcap
version 1.0 branch 1_0_rel0b (20091008)
Eth: opened OS device \Device\NPF_{92A95742-DF7C-4BA2-A9CD-BC544B665C2B} -
WiFi
C:/vax/mima/simh.ini-42> boot cpu
Loading boot code from internal ka48a.bin
KA48-A V1.2-32B-V4.0
08-00-2B-A6-AE-DB
24MB
?? 010 2 LCG 0086
?? 001 3 DZ 0032
?? 001 4 CACHE 0512
?? 001 7 IT 1049
?? 001 8 SYS 0128
?? 001 9 NI 0024
>>> set fboot 1
FBOOT = 00000001
>>> show dev
VMS/VMB ADDR DEVTYPE NUMBYTES RM/FX WP DEVNAM
REV
------- ---- ------- -------- ----- -- ------
---
ESA0 08-00-2B-A6-AE-DB
DKA0 A/0/0 DISK 3.57GB FX RZ24
4041
DKA100 A/1/0 DISK 159.33MB FX RZ24
4041
DKA400 A/4/0 DISK 205.36MB FX RZ24
4041
..HostID.. A/6 INITR
>>> boot dka400
-DKA400
VAX/VMS Version V5.5-2 Major version id = 1 Minor version id = 0
**** FATAL BUG CHECK, VERSION = V5.5-2 INCONSTATE, Inconsistent I/O data
base
CRASH CPU: 00 PRIMARY CPU: 00
ACTIVE/AVAILABLE CPU MASKS: 00000001/00000001
CURRENT PROCESS = SWAPPER
REGISTER DUMP
R0 = 00000000
R1 = 00040000
R2 = 00000000
R3 = 815C04F0
R4 = 00000000
R5 = 815C04F0
R6 = 817C4210
R7 = 00000034
R8 = 00000000
R9 = 00000000
R10= 00000000
R11= 00000000
AP = 00000000
FP = 00000000
SP = 817C55CC
PC = 816EC580
PSL= 04080004
KERNEL/INTERRUPT/BOOT STACK
817C55D4 815BEED9
817C55D8 00000000
817C55DC 00000000
817C55E0 00000000
817C55E4 00000000
817C55E8 813DF198
817C55EC 00000000
817C55F0 00000000
817C55F4 00000000
817C55F8 800026D8
817C55FC 00000000
LOADED IMAGES
CPULOA.EXE 81387E00 8138C000
SYSLICENSE.EXE 8138C000 8138DE00
SYSGETSYI.EXE 8138DE00 8138F800
SYSDEVICE.EXE 8138F800 81392400
MESSAGE_ROUTINES.EXE 81392400 81397A00
EXCEPTION.EXE 813A7800 813B0E00
LOGICAL_NAMES.EXE 813B0E00 813B3000
SECURITY.EXE 813B3000 813B5C00
LOCKING.EXE 813B5C00 813BB200
PAGE_MANAGEMENT.EXE 813BB400 813C4400
WORKING_SET_MANAGEMENT.EXE 813C8600 813CE000
IMAGE_MANAGEMENT.EXE 813CE000 813D1200
EVENT_FLAGS_AND_ASTS.EXE 813D1200 813D2A00
IO_ROUTINES.EXE 813D2C00 813DBC00
PROCESS_MANAGEMENT.EXE 813DBC00 813E6400
ERRORLOG.EXE 815B9800 815BA600
PRIMITIVE_IO.EXE 815BA800 815BBA00
SYSTEM_SYNCHRONIZATION_UNI.EXE 815BBC00 815BDC00
SYSTEM_PRIMITIVES.EXE 815BDE00 815C1C00
EXEC_INIT.EXE 815C2000 815C8400
PRIMARY CPU DATABASE = 817C4000
CRASH CPU DATABASE = 817C4000
SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
Infinite loop, PC: 813B6A22 (BRB 813B6A22)
Goodbye
sim>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20190504/254aabd3/attachment-0001.html>
More information about the Simh
mailing list