[Simh] More VAX Simulators
Johnny Billquist
bqt at softjar.se
Fri May 3 15:31:53 EDT 2019
Are you trying to just cut-and-paste the license?
The usual problem is that you just cannot just force-feed data on a
terminal line. You will be loosing characters. There is no flow control
that can help you...
Johnny
On 2019-05-03 02:36, Ray Jewhurst wrote:
> I tried doing a VMS 7.3 CD install on the 4000/60 and it went swimmingly
> until I tried to install the PAKs and I got this:
>
> $!
> $! HPE HOBBY LICENSE AGREEMENT
> $!
> %CREATE-E-READERR, error reading SYS$INPUT:.;
> -RMS-F-RER, file read error
> -SYSTEM-W-DATAOVERUN, data overrun
>
> I am running 72 Megs and I do not get this error on 3900 or MicroVAX
> II. I know there is another way to copy the PAKs over using an iso but
> the instructions in the Hobbyist letter seemed kind of fuzzy to me. Am
> I doing anything wrong or is the the way a 4000/60 should behave?
>
> Thanks
>
> Ray
>
> On Wed, May 1, 2019 at 6:16 PM Matt Burke <matt at 9track.net
> <mailto:matt at 9track.net>> wrote:
>
> On 01/05/2019 13:36, mark at wickensonline.co.uk
> <mailto:mark at wickensonline.co.uk> wrote:
> > Matt
> >
> > I've built the VAXstation 4000/60 and 4000/VLC images. Is it
> possible to post an example simh.ini file for either or both of
> these please, it would save me some considerable guesswork!
> >
> > I have just reconfigured a FreeAXP emulator running on Windows
> which contains SLAVE, formerly an AlphaServer 1000A. It serves up a
> cluster member disk for a 4000/VLC so that will be a great test of
> your new systems.
> >
> > I previously had lots of trouble with FreeAXP and SIMH residing
> on the same windows box, turns out that FreeAXP really doesn't like
> WinPCap - it crashes on startup and it is very difficult to kill the
> image.
> >
> > Regards, Mark.
> >
> Hi Mark,
>
> The first thing to note (if you haven't spotted it already) is that the
> simulators have been merged into the Simh master branch and a number of
> fixes have been applied. CD-ROM and tape drive support is now included
> along with fixes to the memory sizing for the M60 and VLC.
>
>
> The VAXstation 4000/60 and 4000/VLC are very similar so this simh.ini
> will work for both:
>
> ; Set system memory size
> ; M60 can be one of 8m, 16m, 24m, 32m, 40m, 48m, 56m, 72m, 80m, 104m
> ; VLC can be one of 8m, 16m, 24m
> ;
> set cpu 24m
> ;
> ; Attach the NVRAM device
> ;
> attach nvr vaxstation4000.nvr
> ;
> ; Set the MAC address in the network address ROM
> ; This will need to match whatever your boot server is expecting
> ;
> set nar mac=08:00:2b:40:00:60
> ;
> ; Setup local SCSI disks if required (here are a few examples)
> ; Also try 'help rz'
> ;
> ; set rz0 rz26
> ; attach rz0 disk0.img
> ; set rz1 disable
> ; set rz2 disable
> ; set rz3 disable
> ; set rz4 rrd40
> ; attach rz4 vms73.iso
> ; set rz5 tz30
> ; attach rz5 backup.tap
> ; rz6 is always disabled because this is the initiator SCSI ID
> ; set rz7 disable
> ;
> ; Enable LANCE Ethernet (device ESA0 under VMS)
> ;
> set xs enable
> ;
> ; Attach Ethernet device to a host interface
> ;
> attach xs eth0
> ;
> ; Start the simulator
> ;
> boot cpu
>
> The first time the ROM self-test runs after the memory size is changed
> or after attaching a new NVRAM file it will perform a thorough memory
> test. This can take quite a long time especially with 104MB. You will
> see multiple selftest failures but don't worry about it, they're
> expected for now. After the self-test completes I would recommend
> enabling the fast boot option:
>
> >>> SET FBOOT 1
>
> This will significantly speed up subsequent restarts of the simulator.
> Eventually I'll patch the ROM to skip the memory tests.
>
> Assuming your boot server is all setup you can now boot from the
> Ethernet:
>
> >>> BOOT ESA0
>
> I haven't tested Ethernet booting on these simulators for quite some
> time so I hope it works!
>
> Let me know how it goes.
>
> Matt
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com <mailto:Simh at trailing-edge.com>
> http://mailman.trailing-edge.com/mailman/listinfo/simh
>
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
>
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
More information about the Simh
mailing list