[Simh] winpcap problem

[gérard Calliet]

Hello,

I used the recommended tool windump -D and it doesn't see the new NICs. 
So it is a pure problem of compatibility between Winpcap and the new NICs.

Did anyone see a similar problem? Are there somewhere WinPcap gurus?

Gérard Calliet


Le 11/04/2019 à 09:42, gérard Calliet a écrit :
> Hello,
>
> I tried a reboot of the host. Same problem. Is it possible there are 
> NICs not compatible with WinPcap? or some bizarre configuration to do 
> on the NIC?
>
> Gérard Calliet
>
> Le 05/04/2019 à 02:19, Mark Pizzolato a écrit :
>> On Tuesday, April 2, 2019 at 1:42 PM, gérard Calliet wrote:
>>> I have some trouble using winpcap (on windows) with simh.
>>>
>>> I added a NIC (intel ethernet server adapter i350-t2), I can see it 
>>> on the windows
>>> configuration panel, but I don't see it using simh "sho eth"
>>> command, which uses winpcap (version 4.1.3). The other NICs are seen 
>>> by the
>>> same command.
>>>
>>> Any help?
>> Winpcap has a problem with detecting newly installed network devices 
>> that
>> weren't present when the system was booted.  Try rebooting the system
>> and see if you continue to see the same problem.
>>
>> - Mark
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh