[Simh] winpcap problem

[gérard Calliet]

Thanks, I'll try that. A little bit later because the host server is a 
production one.

n.b.: This story is the following of the one with performances on 
OpenVMS Itanium. The performance on the windows server is about 5 times 
better, so. My first idea was "we can do everything with 2 OpenVMS 
server replacing 2 alpha and 1 Vax", but it seems there would be a lot 
of work to get good performances, and in the mean time x86 have evolved 
faster.

Gérard Calliet

Le 05/04/2019 à 02:19, Mark Pizzolato a écrit :
> On Tuesday, April 2, 2019 at 1:42 PM, gérard Calliet wrote:
>> I have some trouble using winpcap (on windows) with simh.
>>
>> I added a NIC (intel ethernet server adapter i350-t2), I can see it on the windows
>> configuration panel, but I don't see it using simh "sho eth"
>> command, which uses winpcap (version 4.1.3). The other NICs are seen by the
>> same command.
>>
>> Any help?
> Winpcap has a problem with detecting newly installed network devices that
> weren't present when the system was booted.  Try rebooting the system
> and see if you continue to see the same problem.
>
> - Mark
>