[Simh] Questions about VT emulation

[Ray Jewhurst]

Hi,
First of all, I find it best to "set console" right before the boot
command. Second, if you are you using PuTTy you can set the keyboard
mapping to either VT100+ or VT400 (Num Lock is Gold Key).  Also, the Write
Enabled is default so declaring isn't necessary.

Have fun,

Ray

On Fri, May 26, 2017 at 10:27 PM, Joe Ambrose <joe11701 at verizon.net> wrote:

> Hi Y'all !!!
>
> I am trying to set up a PDP-11 emulation using RT-11.....
>
> I've set up a remote telnet console and I'd like to find out what VT
> emulatior you find that works.
> Here's my config file....
>
> set console telnet=1111
> set cpu 11/23+ 256K
> attach LPT lpt.txt
> set rl0 writeenabled
> set rl0 rl02
> attach rl0 rl0.dsk
> boot rl0
>
> When I sh console... this is what I get....
>
> PDP-11 simulator V3.9-0
> Listening on port 1111 (socket 136)
> Disabling CR
> Waiting for console Telnet connection
> rt11.ini> boot rl0
> Simulation stopped
> sim> sh console
> WRU = 5
> BRK = 0
> DEL = 10
> pchar mask = 23600
> Logging disabled
> Listening on port 1111
> Debug output disabled
>
> My question is about the pchar mask.
> What's it for?
> Will it affect the escape sequences I need to emulate a VT?
>
> Any help is much appreciated!
>
> =================================================
> Joseph Ambrose
> 172 Ketcham Avenue
> Amityville, NY 11701
> Primary: 631-598-0528
>   Mobile: 516-380-6047
>    Email: joe11701 at verizon.net <mailto:joeambrose at optonline.net>
>   Profile: http://www.linkedin.com/in/jambrose0321
>      Blog: http://houseofdoejoegetsbigger.blogspot.com/
>
>
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20170526/d7e18834/attachment.html>