[Simh] Adding storage to vax running 4.3BSD

[Jason Stevens]

Ah now that makes more sense!

On May 11, 2017 5:11:34 AM GMT+08:00, Alan Perry <aperry at snowmoose.com> wrote:
>
>Problem solved. Apparently this kernel doesn't know about RA82s. I 
>changed them to RA81 and it worked fine.
>
>alan
>
>On 5/10/17 1:59 PM, Alan Perry wrote:
>> There is definitely some confusion here. But note that Bob brought up
>
>> disklabel, not me. I was pointing out that I could not follow the 
>> disklabel step in his instructions because there is no disklabel 
>> command in the root path on my 4.3 BSD (it says 4.3BSD in the motd
>and 
>> the login prompt).
>>
>> I already indicated that "newfs /dev/ra1c ra82" is responding:
>>  Don't have a parition table for a DU RA 82
>>  /dev/rra1c: cannot create
>>
>> I get the same partition message at boot time:
>>  ra1 at uda0 slave 1
>>  Don't have a parition table for a DU RA 82
>>  ra2 at uda0 slave 2
>>  Don't have a parition table for a DU RA 82
>>
>> I initially thought that this was a partition table in a disklabel, 
>> but it been explained to me that the layout is compiled into the 
>> kernel and there should be a matching entry in /etc/disktab. There 
>> wasn't one, so I created a disktab entry for ra82.
>>
>> alan
>>
>> On 5/10/17 1:38 PM, Anders Magnusson wrote:
>>> You have mixed up something here.
>>>
>>> There are no disklabels whatsoever in 4.3BSD, and nothing in newfs 
>>> that cares about it.
>>> If your newfs complains about disklabels, you are using newfs from 
>>> something else, not 4.3BSD.
>>>
>>> -- R
>>>
>>> Den 2017-05-10 kl. 21:15, skrev Alan Perry:
>>>> Your instructions say to use disklabel. However, there is no 
>>>> disklabel in the default root execution path on the 4.3 BSD image 
>>>> that I am running.
>>>>
>>>> On 5/10/17 11:03 AM, Bob Eager wrote:
>>>>> If you look through those instructions I posted a link to, you'll
>see
>>>>> how to do a disklabel.
>>>>>
>>>>> On Wed, 10 May 2017 07:41:01 -0700
>>>>> Alan Perry <aperry at snowmoose.com> wrote:
>>>>>
>>>>>> I have tried to run newfs on partition c and it fails,
>complaining
>>>>>> about the lack of a partition table.
>>>>>>
>>>>>>> On May 10, 2017, at 07:29, Jason Stevens
>>>>>>> <jsteve at superglobalmegacorp.com> wrote:
>>>>>>>
>>>>>>> If Im remembering right, straight 4.3 pre-dates the labels, it's
>a
>>>>>>> hard coded partition types in the drivers at this point.
>>>>>>>
>>>>>>> If you don't care, just use the 0c devices aka 'whole disk' ...
>or
>>>>>>> I recall that working well enough.
>>>>>>>> ----------
>>>>>>>> From:    Alan Perry
>>>>>>>> Sent:    Wednesday, May 10, 2017 12:57 AM
>>>>>>>> To:    simh at trailing-edge.com
>>>>>>>> Subject:    [Simh] Adding storage to vax running 4.3BSD
>>>>>>>>
>>>>>>>> What are the steps for adding storage to a SIMH vax (vax750, to
>be
>>>>>>>> specific) running 4.3BSD? I created disk image files on the
>host
>>>>>>>> OS of the proper size (for RA82s) and attached them through
>>>>>>>> the .ini file. However, they don't have partition tables and
>this
>>>>>>>> version of BSD doesn't seem to have a tool for creating them.
>So,
>>>>>>>> how do I put partition tables on the ra82 disk images?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> alan
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Simh mailing list
>>>>>>>> Simh at trailing-edge.com
>>>>>>>> http://mailman.trailing-edge.com/mailman/listinfo/simh
>>>>>> _______________________________________________
>>>>>> Simh mailing list
>>>>>> Simh at trailing-edge.com
>>>>>> http://mailman.trailing-edge.com/mailman/listinfo/simh
>>>>> _______________________________________________
>>>>> Simh mailing list
>>>>> Simh at trailing-edge.com
>>>>> http://mailman.trailing-edge.com/mailman/listinfo/simh
>>>>
>>>> _______________________________________________
>>>> Simh mailing list
>>>> Simh at trailing-edge.com
>>>> http://mailman.trailing-edge.com/mailman/listinfo/simh
>>>
>>
>> _______________________________________________
>> Simh mailing list
>> Simh at trailing-edge.com
>> http://mailman.trailing-edge.com/mailman/listinfo/simh
>
>_______________________________________________
>Simh mailing list
>Simh at trailing-edge.com
>http://mailman.trailing-edge.com/mailman/listinfo/simh

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20170511/287dd4ab/attachment.html>