[Simh] VAX SimH network not working
Mark Abene
phiber at phiber.com
Thu Dec 7 16:50:32 EST 2017
Try typing "passive" after you log in, to toggle passive ftp mode (whether
the client or server establishes the data channel).
That may make a difference.
-Mark
On Thu, Dec 7, 2017 at 8:34 AM, Shaun McCloud <
shaun.thomas.mccloud at gmail.com> wrote:
> Jordi,
>
> That works and I can get an IP address. I'm able to connect via FTP but I
> am not able to get a directory listing and therefore get disconnected. Any
> ideas on that?
>
> Shaun McCloud, MCDST
>
> On Thu, Dec 7, 2017 at 10:01 AM, Jordi Guillaumes Pons <
> jg at jordi.guillaumes.name> wrote:
>
>>
>>
>> > On 7 Dec 2017, at 15:03, Shaun McCloud <shaun.thomas.mccloud at gmail.com>
>> wrote:
>> >
>> > Tony & Jordi,
>> >
>> > Thank you for your help. When it comes to DECNET, I don't really care
>> about that since right now I have a single VMS emulated system. I am
>> running the current beta version so I will try it without the microcode.
>> If I'm understanding correctly, unless I do TUN/TAP, VDE or SLiRP (NAT) I
>> can't even connect to my emulated VAX via telnet or ftp?
>>
>> That’s correct. You can’t see the emulator from the host if you are using
>> libpcap only networking.
>>
>> To set up an IP only network based on , do this:
>>
>> sim> attach xq nat:TCP=2323:10.0.2.15:23 TCP=2121:10.0.2.15:21
>>
>> Simh will reply:
>>
>> libpcap version 1.8.1 -- Apple version 79.20.1
>> NAT args: TCP=2323:10.0.2.15:23 TCP=2121:10.0.2.15:21
>> NAT network setup:
>> gateway =10.0.2.2/24(255.255.255.0)
>> DNS =10.0.2.3
>> dhcp_start =10.0.2.15
>> redir TCP =2121:10.0.2.15:21
>> redir TCP =2323:10.0.2.15:23
>> Protocol[State] FD Source Address Port Dest. Address Port RecvQ
>> SendQ
>> TCP[HOST_FORWARD] 12 * 2121 10.0.2.15 21
>> 0 0
>> TCP[HOST_FORWARD] 11 * 2323 10.0.2.15 23
>> 0 0
>> Eth: opened OS device nat:TCP=2323:10.0.2.15:23 TCP=2121:10.0.2.15:21
>>
>> Then, in the VAX side enable DHCP for QE0, setup 10.0.2.2 as gateway and
>> 10.0.2.3. You will be able to telnet into your vax using telnet localhost
>> 2323 and connect to the ftp server (supposing you enable them in TCP/IP
>> services) at localhost port 2121.
>>
>> If you want DECNET, I recommend VDE, but tun/tap also works well if you
>> do some bridge setup in your host
>>
>>
>>
>
> _______________________________________________
> Simh mailing list
> Simh at trailing-edge.com
> http://mailman.trailing-edge.com/mailman/listinfo/simh
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20171207/54391455/attachment.html>
More information about the Simh
mailing list