[Simh] Configuring DMC11 Devices

[Paul Koning]

> On Jan 4, 2016, at 4:51 AM, Mark Pizzolato <Mark at infocomm.com> wrote:
> 
> On Sunday, January 3, 2016 at 2:17 PM, Paul Koning wrote:
>> ...That is with two DMCs pointing at each other:
>> 
>> sim> show dmc
>> DMC	lines=2, connectpoll=2, address=17760070-17760107*
>> 	vector=300*, 2 units
>>  DMC0	attached to 10143, peer=127.0.0.1:11043, speed=0 (unrestricted)
>> 	MicroDiag=enabled, type=DMC
>>  DMC1	attached to 11043, peer=127.0.0.1:10143, speed=0 (unrestricted)
>> 	MicroDiag=enabled, type=DMC
> 
> This configuration is very odd.  You've got DMC0 connecting to itself AND you've got DMC1 also connecting to itself using the exact same ports as DMC0.  I wouldn't expect this to ever work...

No, they are cross-connected.  I admit it is hard to read because of the similar looking port numbers.

	paul