[Simh] Ultrix 4.0 and DEQNA-LOCK

[Cory Smelosky]

On Wed, 31 Aug 2016, Johnny Billquist wrote:

> Hi.
>
> On 2016-08-31 17:40, Cory Smelosky wrote:
>
>>> Cory, could you post the output from showing the device in simh?
>>> I wonder if there might be some confusion about how to turn off lock
>>> mode. I've never even tried modifying that. By default, I would assume
>>> it would be correctly configured, meaning it should work right if you
>>> don't try to "fix it".
>> 
>> I am doing SET DEQNALOCK to OFF, and SHOW XQ (in my initial posting
>> shows that IIRC) with it in DELQA mode, and later on after probing and
>> initialising it, despite DEQNALOCK set to OFF and showing as OFF, SHOW
>> XQ shows it has reverted to being in DEQNA mode.
>
> No. You initial posting showed the dmesg output, but not the simh input or 
> output, unless I'm very confused.
>
> 	Johnny
>

set xq en
set xq deqnalock=off
set xq type=delqa
at xq vde:/tmp/vde

(BOOT/R5:0 DUA0
Simulation stopped, PC: 2004CBD9 (CMPW (R5)+,28(SP))
sim> show xq
XQ      address=20001920-2000192F, no vector, MAC=08:00:2B:6D:9C:95
         type=DELQA, polling=disabled, sanity=OFF
         throttle=disabled, DEQNALock=OFF, leds=(ON,ON,ON)
         attached to vde:/tmp/vde

sim> c
[...]
qe0: DEC DELQA Ethernet Interface DEQNA-lock Mode, hardware address 
08:00:2b:6d:9c:95
dz0 at uba0 csr 160100 vec 300, ipl 17
dz1 at uba0 csr 160110 vec 310, ipl 17
dz2 at uba0 csr 160120 vec 320, ipl 17
dz3 at uba0 csr 160130 vec 330, ipl 17

Simulation stopped, PC: 80003551 (BEQL 800034F0)
sim> show xq
XQ      address=20001920-2000192F, vector=3F4*, MAC=08:00:2B:6D:9C:95
         type=DELQA, mode=DEQNA, polling=disabled, sanity=OFF
         throttle=disabled, DEQNALock=OFF, leds=(ON,ON,ON)
         attached to vde:/tmp/vde

-- 
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects