[Simh] rsx11m46.tpc and simh
Bill Cunningham
billcun at suddenlink.net
Sat Oct 24 17:53:54 EDT 2015
http://ancientbits.blogspot.com/2012/07/installing-rsx-11m-46-from-scratch-part.html
I used those links and that blog.
----- Original Message -----
From: Mark Pizzolato
To: Bill Cunningham ; simh at trailing-edge.com
Sent: Saturday, October 24, 2015 4:35 PM
Subject: RE: [Simh] rsx11m46.tpc and simh
Hi Bill,
Please provide:
1) The exact place where you picked up the tape image you are trying to boot from
2) The exact output produced when you run the simulator with the provided configuration
Thanks
- Mark
From: Simh [mailto:simh-bounces at trailing-edge.com] On Behalf Of Bill Cunningham
Sent: Saturday, October 24, 2015 11:37 AM
To: simh at trailing-edge.com
Subject: [Simh] rsx11m46.tpc and simh
I have some instructions on how to use the pdp11 simulator for the mentioned in the subject line.
set cpu 11/45
set cpu 256k
set cpu idle
SET RL enable
set RL0 RL02
set RL1 RL02
SET RP ENABLE
SET RP0 RP06
ATTACH RP0 RP06.000
SET RP1 RP06
;ATTACH RP1 RP06.001
SET TS ENABLE
SET TS0 FORMAT=TPC
SET TS0 LOCKED
SET DZ ENABLE
SET DZ LINES=8
ATTACH -am DZ 11023
I am not sure the enableds are needed here. And a part additional is,
at ts0 rsx11m46.tpc
boot ts0
I am getting error codes. Does anyone happen to know simh well enough to get simh pdp11 to boot this file?
Bill
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20151024/c868a442/attachment-0001.html>
More information about the Simh
mailing list