[Simh] VAX sim: rqb address?

[Mark Pizzolato]

On Nov 1, 2015 10:53 AM, Cory Smelosky <b4 at gewt.net> wrote:
>
> On Sun, 1 Nov 2015, Mark Pizzolato wrote:
>
> > On Nov 1, 2015 10:42 AM, "Cory Smelosky" <b4 at gewt.net> wrote:
> >> Shouldn't the CSR for the second RQ controller be 760334?  It's
> > autoconfiguring to 760374!
> >
> > It depends on what else is in the configuration.  The first MSCP disk
> > controller has a static address, subsequent controllers have floating
> > addresses.
> >
> > Send along your config and I'll check, or you can see what VMS SYSGEN's
> > "CONFIG" stuff shows you...
> >
>
> sim> show qba iospace
>        Address         Vector  BR # Device
> -------------------- -------- -- - ------
> 20000040 - 2000005F* 2C0-2DC   4 4 DZ

These DZ devices have a higher floating rank than the second mscp controller.  Add these to the SYSGEN CONFIG....

> 200000FC - 200000FF*           4 1 RQB
> 20001468 - 2000146B            4 1 RQ
> 20001920 - 2000192F            4 1 XQ
> 20001940 - 20001943            4 1 TQ
> 20001F40 - 20001F41              1 QBA
>
>
> >>>show dev
> UQSSP Disk Controller 0 (772150)
> -DUA0 (RD54)
> -DUA1 (RD54)
> -DUA2 (RD54)
> -DUA3 (RX50)
>
> UQSSP Disk Controller 1 (760374)
> -DUB0 (RD54)
> -DUB1 (RD54)
> -DUB2 (RD54)
> -DUB3 (RD54)
>
> UQSSP Tape Controller 0 (774500)
> -MUA0 (TK50)
> -MUA1 (TK50)
> -MUA2 (TK50)
> -MUA3 (TK50)
>
> Ethernet Adapter 0 (774440)
> -XQA0 (08-00-2B-AA-BB-CC)
>
> >>>configure
> Enter device configuration, HELP, or EXIT
> Device,Number? rqdx3
> Device,Number? kda50
> Device,Number? tqk50
> Device,Number? delqa
> Device,Number? exit
>
> Address/Vector Assignments
> -774440/120 DELQA
> -772150/154 RQDX3
> -760334/300 KDA50
> -774500/260 TQK50

I don't know why the boot ROM code SHOW DEV command doesn't list the DZ devices, maybe it is only showing bootable devices.

- Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20151101/ab1ae6c3/attachment.html>