[Simh] RT-11 bootable tape

[Sander Reiche]

But it does seems to work in e11. Could be a hack, but I'll try V05.07
tomorrow.

re,

Sander
On Nov 5, 2013 10:56 PM, "Shoppa, Tim" <tshoppa at wmata.com> wrote:

>  It has been many years but I think there was a problem with the tape
> boot blocks in 5.6 that was fixed in 5.7.
>
>
>
> Tim.
>
>
>
> *From:* simh-bounces at trailing-edge.com [mailto:
> simh-bounces at trailing-edge.com] *On Behalf Of *Sander Reiche
> *Sent:* Tuesday, November 05, 2013 10:14 AM
> *To:* simh at trailing-edge.com
> *Subject:* [Simh] RT-11 bootable tape
>
>
>
> Hi all,
>
>
>
> Trying to get an actual scsi tape running on a CQD220A on real iron(tm),
> but I'm still trying to figure things out. I was originally using
> Ersatz-11, but I though I'd give it a go on SimH.
>
>
>
> When booted from a bootable simulated TK50(tk50.tap), it consistently
> halts on trying to run MDUP.Mx to further the "installation" of RT-11 from
> said tape.
>
>
>
> Following a transcript:
>
>
>
> PDP-11 simulator V3.9-0
>
> sim> att rl0 rtv5rl.06
>
> sim> att tq0 tk50.tap
>
> TQ: creating new file
>
> sim> b rl
>
>
>
> RT-11FB  V05.06
>
>
>
> .TYPE V5USER.TXT
>
>
>
>                                    RT-11 V5.6
>
>
>
>     Installation  of  RT-11  Version  5.6 is complete and you are now
> running
>
>     RT-11 from your system volume.
>
>
>
> .R MSCPCK
>
> ?MSCPCK-I-MU0-TK50  FW Rev Level is 005/HW Rev Level is 001
>
> ?MSCPCK-W-TQK50 controller below FW Rev 4/HW Rev 6
>
>
>
> .ass mu0 kit
>
>
>
> .ass dl0 bin
>
>
>
> .$@mub
>
>
>
> .$Load Bin,Kit
>
>
>
> .$Ini/Que/Vol/File:Bin:MBOOT.BOT Kit:
>
> MU0:/Initialize; Are you sure? Y
>
> Volume ID? HU21J
>
> Owner?     MU 1/1
>
>
>
> .$Cop Bin:MSBOOT.BOT Kit:/Pos:-1
>
>  Files copied:
>
> BIN:MSBOOT.BOT to KIT:MSBOOT.BOT
>
>
>
> .$Cop Bin:MDUP.AI Kit:/Pos:-1
>
>  Files copied:
>
> BIN:MDUP.AI    to KIT:MDUP.AI
>
>
>
> .$Cop Bin:MDUP.MM Kit:/Pos:-1
>
>  Files copied:
>
> BIN:MDUP.MM    to KIT:MDUP.MM
>
>
>
> .$Cop Bin:MDUP.MS Kit:/Pos:-1
>
>  Files copied:
>
> BIN:MDUP.MS    to KIT:MDUP.MS
>
>
>
> .$Cop Bin:MDUP.MT Kit:/Pos:-1
>
>  Files copied:
>
> BIN:MDUP.MT    to KIT:MDUP.MT
>
>
>
> .$Cop Bin:MDUP.MU Kit:/Pos:-1
>
>  Files copied:
>
> BIN:MDUP.MU    to KIT:MDUP.MU
>
>
>
> ................<snip>..................
>
>
>
> .$Cop Bin:INDEX.IDX Kit:/Pos:-1
>
>  Files copied:
>
> BIN:INDEX.IDX  to KIT:INDEX.IDX
>
>
>
> .$Unload Bin,Kit
>
>
>
> sim> sh tq
>
> TQ, TK50 (94MB), address=17774500-17774503, no vector, 4 units
>
>   TQ0, attached to tk50.tap, write enabled, SIMH format, capacity=98MB
>
>   TQ1, not attached, write enabled, SIMH format, capacity=98MB
>
>   TQ2, not attached, write enabled, SIMH format, capacity=98MB
>
>   TQ3, not attached, write enabled, SIMH format, capacity=98MB
>
> sim> b tq
>
>
>
> .MSBOOT V05.07
>
> *MDUP.MU
>
>
>
> Trap stack push abort, PC: 062462 (ADD (R1)+,52040(R2))
>
> sim>
>
>
>
> Am I doing something wrong?
>
>
>
> regards,
>
>
>
> Sander Reiche
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20131106/af1241f3/attachment-0002.html>