[Simh] Unable to telnet to other hosts
priya chincholikar
priyachinc at gmail.com
Mon Nov 4 08:48:57 EST 2013
Thank you, I will build it again and post the details :)
- Priya
On Mon, Nov 4, 2013 at 7:13 PM, Mark Pizzolato - Info Comm <
Mark at infocomm.com> wrote:
> From what you’ve provided, I can’t really tell EXACTLY what simulator you
> are running or how it was built or what it thinks is its capabilities are.
> The latest source is the most supportable and the build (makefile) tells us
> many things. Phillip Wherry wrote the instructions you are followed 9
> years ago. Things have evolved since that time and become much smoother.
>
>
>
> You are getting the “BOOT/R5:0 EXIT” message since you have the system
> setup to autoboot (BDR set to 0) but your NVRAM doesn’t yet specify a
> default boot device. This is NOT related to the network issues.
>
>
>
> Please build the latest source and if what you then need to do isn’t
> obvious, then we can explore further.
>
>
>
> The total build instructions should be:
>
> $ wget https://github.com/simh/simh/archive/master.zip
>
> $ unzip simh-master.zip
>
> $ cd simh-master
>
> $ make vax
>
>
>
> As I said, if the simulator doesn’t work correctly for you then the output
> produced during the above make will be useful.
>
>
>
> - Mark
>
>
>
> *From:* priya chincholikar [mailto:priyachinc at gmail.com]
> *Sent:* Monday, November 04, 2013 5:31 AM
> *To:* Mark Pizzolato - Info Comm
> *Cc:* Lennert Van Alboom; simh at trailing-edge.com
> *Subject:* Re: [Simh] Unable to telnet to other hosts
>
>
>
> I have followed steps from
> http://www.wherry.com/gadgets/retrocomputing/vax-simh.html to build the
> simulator, earlier I was having a problem while starting TCP/IP, but I
> solved that by attaching the interface type in vax.ini file,
>
>
>
> Attach Ethernet to a network interface
>
> set XQ mac=08-00-2B-AC-AC-B1
>
> set XQ type=DELQA
>
> attach XQ em1
>
>
>
> I don't think I have to build it again unless of course that is the only
> solution to make this work.
>
>
>
> I dont know why I get the (BOOT/R5:0 EXIT when I run the simulator,
>
> Please check this,
>
>
>
> VAX simulator V3.9-0
>
> NVR: buffering file in memory
>
> RQ: unit is read only
>
> /usr/local/vax/bin/vax.ini> attach XQ em1
>
> Command not allowed
>
>
>
>
>
> KA655-B V5.3, VMB 2.7
>
> Performing normal system tests.
>
> 40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
>
> 24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
>
> 08..07..06..05..04..03..
>
> Tests completed.
>
> Loading system software.
>
> (BOOT/R5:0 EXIT
>
>
>
>
>
>
>
> 2..
>
> ?41 DEVASSIGN, EXIT
>
> ?06 HLT INST
>
> PC = 00000C1A
>
> Failure.
>
> >>>show version
>
> KA655-B V5.3, VMB 2.7
>
> >>>boot dua0
>
> (BOOT/R5:0 DUA0
>
>
>
>
>
>
>
> 2..
>
> -DUA0
>
> 1..0..
>
>
>
>
>
> %SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
>
> %SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
>
> %SYSBOOT-I-SYSBOOT Mapping PAGEFILE.SYS on the System Disk
>
> %SYSBOOT-I-SYSBOOT SAVEDUMP parameter not set to protect the PAGEFILE.SYS
>
> OpenVMS (TM) VAX Version V7.3 Major version id = 1 Minor version id
> = 0
>
> %WBM-I-WBMINFO Write Bitmap has successfully completed initialization.
>
> $! Copyright 2001 Compaq Computer Corporation.
>
>
>
> %STDRV-I-STARTUP, OpenVMS startup begun at 4-NOV-2013 18:44:52.23
>
> %RUN-S-PROC_ID, identification of created process is 00000206
>
> %DCL-S-SPAWNED, process SYSTEM_1 spawned
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:11.64 %%%%%%%%%%%
>
> Operator _FORD$OPA0: has been enabled, username SYSTEM
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:11.65 %%%%%%%%%%%
>
> Operator status for operator _FORD$OPA0:
>
> CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
>
> LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9,
> OPER10,
>
> OPER11, OPER12
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:11.69 %%%%%%%%%%%
>
> Logfile has been initialized by operator _FORD$OPA0:
>
> Logfile is FORD::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;32
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:11.70 %%%%%%%%%%%
>
> Operator status for operator FORD::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;32
>
> CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
>
> LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9,
> OPER10,
>
> OPER11, OPER12
>
>
>
> %SET-I-NEWAUDSRV, identification of new audit server process is 0000020C
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:14.87 %%%%%%%%%%%
>
> Message from user SYSTEM on FORD
>
> %SECSRV-I-PROXYSTARTINGUP, proxy processing now starting up
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:14.88 %%%%%%%%%%%
>
> Message from user SYSTEM on FORD
>
> %SECSRV-I-CIACRECLUDB, security server created cluster intrusion database
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:14.89 %%%%%%%%%%%
>
> Message from user SYSTEM on FORD
>
> %SECSRV-I-SERVERSTARTINGU, security server starting up
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:14.89 %%%%%%%%%%%
>
> Message from user SYSTEM on FORD
>
> %SECSRV-I-CIASTARTINGUP, breakin detection and evasion processing now
> starting up
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:17.07 %%%%%%%%%%%
>
> Message from user SYSTEM on FORD
>
> %LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
>
> -LICENSE-F-NOLICENSE, no license is active for this software product
>
> -LICENSE-I-SYSMGR, please see your system manager
>
>
>
>
>
> %LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
>
> -LICENSE-F-NOLICENSE, no license is active for this software product
>
> -LICENSE-I-SYSMGR, please see your system manager
>
> Startup processing continuing...
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:17.72 %%%%%%%%%%%
>
> Message from user SYSTEM on FORD
>
> Warning: DECdtm log file not found (SYS$JOURNAL:SYSTEM$FORD.LM$JOURNAL)
>
> %RMS-E-FNF, file not found
>
> TP server process waiting
>
>
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:18.72 %%%%%%%%%%%
>
> Message from user AUDIT$SERVER on FORD
>
> Security alarm (SECURITY) and security audit (SECURITY) on FORD, system
> id: 1025
>
> Auditable event: Audit server starting up
>
> Event time: 4-NOV-2013 18:45:18.58
>
> PID: 00000203
>
> Username: SYSTEM
>
>
>
> %STARTUP-I-AUDITCONTINUE, audit server initialization complete
>
>
>
> The OpenVMS VAX system is now executing the site-specific startup commands.
>
>
>
>
>
> %TCPIP-I-INFO, TCP/IP Services startup beginning at 4-NOV-2013 18:45:27.15
>
> %TCPIP-I-NORMAL, timezone information verified
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:29.91 %%%%%%%%%%%
>
> Message from user INTERnet on FORD
>
> INTERnet Loaded
>
>
>
> %RUN-S-PROC_ID, identification of created process is 00000211
>
> %TCPIP-I-SETLOCAL, setting domain and/or local host
>
> %TCPIP-I-STARTCOMM, starting communication
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:32.13 %%%%%%%%%%%
>
> Message from user INTERnet on FORD
>
> INTERnet Started
>
>
>
> %TCPIP-I-SETPROTP, setting protocol parameters
>
> %TCPIP-I-DEFINTE, defining interfaces
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:33.43 %%%%%%%%%%%
>
> Message from user INTERnet on FORD
>
> INTERnet ACP Created INTERnet interface: QE0
>
>
>
> %TCPIP-I-STARTNAME, starting name service
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:34.16 %%%%%%%%%%%
>
> Message from user Proxy Server on FORD
>
> Loading proxy server image TCPIP$PROXY_SERVICES
>
>
>
> %TCPIP-S-STARTDONE, TCP/IP Kernel startup completed
>
> %TCPIP-E-PROXYERROR, error processing proxy request
>
> -TCPIP-W-NORECORD, information not found
>
> -RMS-E-RNF, record not found
>
> %TCPIP-E-PROXYERROR, error processing proxy request
>
> -TCPIP-W-NORECORD, information not found
>
> -RMS-E-RNF, record not found
>
> %TCPIP-I-LOADSERV, loading TCPIP server proxy information
>
> %TCPIP-I-SERVLOADED, auxiliary server loaded with 0 proxy records
>
> -TCPIP-I-SERVSKIP, skipped 0 communication proxy records
>
> -TCPIP-I-SERVTOTAL, total of 0 proxy records read
>
> %TCPIP-S-STARTDONE, TCPIP$PROXY startup completed
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:44.48 %%%%%%%%%%%
>
> Message from user INTERnet on FORD
>
> INTERnet ACP Activate FTP Server
>
>
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:44.49 %%%%%%%%%%%
>
> Message from user INTERnet on FORD
>
> INTERnet ACP NOLISTEN Process creation success: Service - FTP
>
>
>
> %TCPIP-S-STARTDONE, TCPIP$FTP startup completed
>
> %TCPIP-S-STARTDONE, TCPIP$FTP_CLIENT startup completed
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:48.13 %%%%%%%%%%%
>
> Message from user PWIPdriver on FORD
>
>
>
> PWIPdriver successfully started.
>
>
>
> %RUN-S-PROC_ID, identification of created process is 00000213
>
> %TCPIP-S-STARTDONE, TCPIP$PWIP_DRIVER startup completed
>
> %%%%%%%%%%% OPCOM 4-NOV-2013 18:45:49.29 %%%%%%%%%%%
>
> Message from user INTERnet on FORD
>
> INTERnet ACP Activate TELNET Server
>
>
>
> %TCPIP-S-STARTDONE, TCPIP$TELNET startup completed
>
> %TCPIP-S-STARTDONE, TCP/IP Services startup completed at 4-NOV-2013
> 18:45:50.33
>
>
>
> %MOUNT-I-MOUNTED, DATA1 mounted on _FORD$DUA1:
>
> %MOUNT-I-MOUNTED, DATA2 mounted on _FORD$DUA2:
>
> %SET-I-INTSET, login interactive limit = 64, current interactive value = 0
>
> SYSTEM job terminated at 4-NOV-2013 18:45:53.04
>
>
>
> Accounting information:
>
> Buffered I/O count: 2340 Peak working set size:
> 1821
>
> Direct I/O count: 866 Peak page file size:
> 8473
>
> Page faults: 12611 Mounted volumes:
> 2
>
> Charged CPU time: 0 00:00:49.40 Elapsed time: 0
> 00:01:01.11
>
>
>
> Welcome to OpenVMS (TM) VAX Operating System, Version V7.3
>
>
>
> After I login <file attached>
>
>
>
>
>
> On Mon, Nov 4, 2013 at 6:30 PM, Mark Pizzolato - Info Comm <
> Mark at infocomm.com> wrote:
>
> Hi Priya,
>
>
>
> I was looking for the output of “SHOW VERSION” from the “sim> “ prompt.
> The “SHOW VERSION” output from the “>>> “ prompt is the version of the VAX
> console ROM. The “sim>” Version information describes the simulator’s
> capabilities.
>
>
>
> From the simulator startup message I can see you’re running simh V3.9.
>
>
>
> Please download and build the source from
> https://github.com/simh/simh/archive/master.zip
>
>
>
> You should just be able to unzip the file and build the vax simulator with
> “make vax”.
>
>
>
> The “messages you get when you run the simulator” include an error
> message. It would be useful to see what command caused that error. To do
> so you can invoke the simulator with the “-v” command switch.
>
>
>
> If this doesn’t help, then the output produced when you invoked the “make
> vax” command to build the simulator will be useful.
>
>
>
> - Mark
>
>
>
> *From:* priya chincholikar [mailto:priyachinc at gmail.com]
> *Sent:* Monday, November 04, 2013 4:50 AM
> *To:* Mark Pizzolato - Info Comm
> *Cc:* Lennert Van Alboom; simh at trailing-edge.com
> *Subject:* Re: [Simh] Unable to telnet to other hosts
>
>
>
> I'm using fedora 18 as the host.
>
> *This is the message i get when i run the simulator :*
>
>
>
> VAX simulator V3.9-0
>
> NVR: buffering file in memory
>
> RQ: unit is read only
>
> /usr/local/vax/bin/vax.ini> attach XQ em1
>
> Command not allowed
>
>
>
>
>
> KA655-B V5.3, VMB 2.7
>
> Performing normal system tests.
>
> 40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
>
> 24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
>
> 08..07..06..05..04..03..
>
> Tests completed.
>
> Loading system software.
>
> (BOOT/R5:0 EXIT
>
>
>
>
>
>
>
> 2..
>
> ?41 DEVASSIGN, EXIT
>
> ?06 HLT INST
>
> PC = 00000C1A
>
> Failure.
>
> >>>show version
>
> KA655-B V5.3, VMB 2.7
>
>
>
> *This is the vax.ini file :*
>
>
>
> ;
>
> ; Load CPU microcode
>
> load -r /usr/local/vax/data/ka655x.bin
>
> ;
>
> ; Attach non-volatile RAM to a file
>
> attach nvr /usr/local/vax/data/nvram.bin
>
> ;
>
> ; This virtual machine has 64M memory
>
> set cpu 64m
>
> ;
>
> ; Define disk drive types. RA92 is largest-supported VAX drive.
>
> set rq0 ra92
>
> set rq1 ra92
>
> set rq2 ra92
>
> set rq3 cdrom
>
> ;
>
> ; Attach defined drives to local files
>
> attach rq0 /usr/local/vax/data/d0.dsk
>
> attach rq1 /usr/local/vax/data/d1.dsk
>
> attach rq2 /usr/local/vax/data/d2.dsk
>
> ;
>
> ; Attach the CD-ROM to its file (read-only)
>
> attach -r rq3 /usr/local/vax/data/cd.iso
>
> ;
>
> ; Disable unused devices. It's also possible to disable individual devices,
>
> ; using a construction like "set rq2 disable" if desired.
>
> ;
>
> set rl disable
>
> set ts disable
>
> ;
>
> ; Attach Ethernet to a network interface
>
> set XQ mac=08-00-2B-AC-AC-B1
>
> set XQ type=DELQA
>
> attach XQ em1
>
> ;
>
> ;Uncomment the line below to enable auto-boot
>
> dep bdr 0
>
> ;
>
> ;Choose one of the following lines.SET CPU CONHALT returns control to the
>
> ; VAX console monitor on a halt event (where behavior will be further
>
> ; determined by whether auto-boot is set--see above. SET CPU SIMHALT will
>
> ; cause the simulator to get control instead.
>
> set cpu conhalt
>
> ;set cpu simhalt
>
> ;
>
> ;Now start the emulator
>
> boot cpu
>
> ;
>
> ; Exit the simulator
>
> exit
>
>
>
> Regards,
>
> Priya
>
>
>
> On Mon, Nov 4, 2013 at 6:02 PM, Mark Pizzolato - Info Comm <
> Mark at infocomm.com> wrote:
>
> On Monday, November 04, 2013 at 4:29 AM, Lennert Van Alboom wrote:
> > The output you sent seems to indicate that your problem isn't with
> telnet,
> > but with the guest not having networking at all (configuring the network
> > inside simh alone doesn't do much).
> >
> > What host OS are you doing this on?
> > What does your host networking stack look like?
> > Can you show your simh configuration file?
>
> Also include the output of SHOW VERSION from within the simulator you are
> using...
>
>
> > Regards,
> >
> >
> > Lennert
> >
> >
> > On Mon, Nov 04, 2013 at 05:20:34PM +0530, priya chincholikar wrote:
> > > Hi,
> > > I'm new to openvms and simh. I installed open vms 7.3 and have
> > configured
> > > tcpip too.
> > > I want to connect to other hosts to test my tcpip.
> > > $ telnet 192.168.0.37
> > > %TELNET-E-IVHOST, Invalid or unknown host 192.168.0.37
> > > -TCPIP-E-NO_RECOVERY, unexpected name server failure
> > > $ ucx
> > > TCPIP> ping 192.168.0.37
> > > PING 192.168.0.37 (192.168.0.37): 56 data bytes
> > > ----192.168.0.37 PING Statistics----
> > > 4 packets transmitted, 0 packets received, 100% packet loss
> > > %SYSTEM-F-TIMEOUT, device timeout
> > > I'm not able to understand where I went wrong.
> > > Thanks,
> > > Priya
> >
> > > _______________________________________________
> > > Simh mailing list
> > > Simh at trailing-edge.com
> > > http://mailman.trailing-edge.com/mailman/listinfo/simh
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20131104/e9e2ce05/attachment-0002.html>
More information about the Simh
mailing list