[Simh] Unable to telnet to other hosts

[priya chincholikar]

I have followed steps from
http://www.wherry.com/gadgets/retrocomputing/vax-simh.html to build the
simulator, earlier I was having a problem while starting TCP/IP, but I
solved that by attaching the interface type in vax.ini file,

Attach Ethernet to a network interface

set XQ mac=08-00-2B-AC-AC-B1

set XQ type=DELQA

attach XQ em1

I don't think I have to build it again unless of course that is the only
solution to make this work.

I dont know why I get the (BOOT/R5:0 EXIT when I run the simulator,
Please check this,

VAX simulator V3.9-0
NVR: buffering file in memory
RQ: unit is read only
/usr/local/vax/bin/vax.ini> attach XQ em1
Command not allowed


KA655-B V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
08..07..06..05..04..03..
Tests completed.
Loading system software.
(BOOT/R5:0 EXIT



  2..
?41 DEVASSIGN, EXIT
?06 HLT INST
        PC = 00000C1A
Failure.
>>>show version
KA655-B V5.3, VMB 2.7
>>>boot dua0
(BOOT/R5:0 DUA0



  2..
-DUA0
  1..0..


%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
%SYSBOOT-I-SYSBOOT Mapping PAGEFILE.SYS on the System Disk
%SYSBOOT-I-SYSBOOT SAVEDUMP parameter not set to protect the PAGEFILE.SYS
   OpenVMS (TM) VAX Version V7.3     Major version id = 1 Minor version id
= 0
%WBM-I-WBMINFO Write Bitmap has successfully completed initialization.
$!  Copyright 2001 Compaq Computer Corporation.

%STDRV-I-STARTUP, OpenVMS startup begun at  4-NOV-2013 18:44:52.23
%RUN-S-PROC_ID, identification of created process is 00000206
%DCL-S-SPAWNED, process SYSTEM_1 spawned
%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:11.64  %%%%%%%%%%%
Operator _FORD$OPA0: has been enabled, username SYSTEM

%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:11.65  %%%%%%%%%%%
Operator status for operator _FORD$OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9,
OPER10,
OPER11, OPER12

%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:11.69  %%%%%%%%%%%
Logfile has been initialized by operator _FORD$OPA0:
Logfile is FORD::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;32

%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:11.70  %%%%%%%%%%%
Operator status for operator FORD::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;32
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9,
OPER10,
OPER11, OPER12

%SET-I-NEWAUDSRV, identification of new audit server process is 0000020C
%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:14.87  %%%%%%%%%%%
Message from user SYSTEM on FORD
%SECSRV-I-PROXYSTARTINGUP, proxy processing now starting up

%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:14.88  %%%%%%%%%%%
Message from user SYSTEM on FORD
%SECSRV-I-CIACRECLUDB, security server created cluster intrusion database

%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:14.89  %%%%%%%%%%%
Message from user SYSTEM on FORD
%SECSRV-I-SERVERSTARTINGU, security server starting up

%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:14.89  %%%%%%%%%%%
Message from user SYSTEM on FORD
%SECSRV-I-CIASTARTINGUP, breakin detection and evasion processing now
starting up

%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:17.07  %%%%%%%%%%%
Message from user SYSTEM on FORD
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager


%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
Startup processing continuing...

%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:17.72  %%%%%%%%%%%
Message from user SYSTEM on FORD
Warning: DECdtm log file not found (SYS$JOURNAL:SYSTEM$FORD.LM$JOURNAL)
        %RMS-E-FNF, file not found
        TP server process waiting


%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:18.72  %%%%%%%%%%%
Message from user AUDIT$SERVER on FORD
Security alarm (SECURITY) and security audit (SECURITY) on FORD, system id:
1025
Auditable event:          Audit server starting up
Event time:                4-NOV-2013 18:45:18.58
PID:                      00000203
Username:                 SYSTEM

%STARTUP-I-AUDITCONTINUE, audit server initialization complete

The OpenVMS VAX system is now executing the site-specific startup commands.


%TCPIP-I-INFO, TCP/IP Services startup beginning at  4-NOV-2013 18:45:27.15
%TCPIP-I-NORMAL, timezone information verified
%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:29.91  %%%%%%%%%%%
Message from user INTERnet on FORD
INTERnet Loaded

%RUN-S-PROC_ID, identification of created process is 00000211
%TCPIP-I-SETLOCAL, setting domain and/or local host
%TCPIP-I-STARTCOMM, starting communication
%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:32.13  %%%%%%%%%%%
Message from user INTERnet on FORD
INTERnet Started

%TCPIP-I-SETPROTP, setting protocol parameters
%TCPIP-I-DEFINTE, defining interfaces
%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:33.43  %%%%%%%%%%%
Message from user INTERnet on FORD
INTERnet ACP Created INTERnet interface: QE0

%TCPIP-I-STARTNAME, starting name service
%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:34.16  %%%%%%%%%%%
Message from user Proxy Server on FORD
Loading proxy server image TCPIP$PROXY_SERVICES

%TCPIP-S-STARTDONE, TCP/IP Kernel startup completed
%TCPIP-E-PROXYERROR, error processing proxy request
-TCPIP-W-NORECORD, information not found
-RMS-E-RNF, record not found
%TCPIP-E-PROXYERROR, error processing proxy request
-TCPIP-W-NORECORD, information not found
-RMS-E-RNF, record not found
%TCPIP-I-LOADSERV, loading TCPIP server proxy information
%TCPIP-I-SERVLOADED, auxiliary server loaded with 0 proxy records
-TCPIP-I-SERVSKIP, skipped 0 communication proxy records
-TCPIP-I-SERVTOTAL, total of 0 proxy records read
%TCPIP-S-STARTDONE, TCPIP$PROXY startup completed
%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:44.48  %%%%%%%%%%%
Message from user INTERnet on FORD
INTERnet ACP Activate FTP Server

%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:44.49  %%%%%%%%%%%
Message from user INTERnet on FORD
INTERnet ACP NOLISTEN Process creation success: Service - FTP

%TCPIP-S-STARTDONE, TCPIP$FTP startup completed
%TCPIP-S-STARTDONE, TCPIP$FTP_CLIENT startup completed
%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:48.13  %%%%%%%%%%%
Message from user PWIPdriver on FORD

 PWIPdriver successfully started.

%RUN-S-PROC_ID, identification of created process is 00000213
%TCPIP-S-STARTDONE, TCPIP$PWIP_DRIVER startup completed
%%%%%%%%%%%  OPCOM   4-NOV-2013 18:45:49.29  %%%%%%%%%%%
Message from user INTERnet on FORD
INTERnet ACP Activate TELNET Server

%TCPIP-S-STARTDONE, TCPIP$TELNET startup completed
%TCPIP-S-STARTDONE, TCP/IP Services startup completed at  4-NOV-2013
18:45:50.33

%MOUNT-I-MOUNTED, DATA1 mounted on _FORD$DUA1:
%MOUNT-I-MOUNTED, DATA2 mounted on _FORD$DUA2:
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
  SYSTEM       job terminated at  4-NOV-2013 18:45:53.04

  Accounting information:
  Buffered I/O count:            2340         Peak working set size:    1821
  Direct I/O count:               866         Peak page file size:      8473
  Page faults:                  12611         Mounted volumes:             2
  Charged CPU time:           0 00:00:49.40   Elapsed time:     0
00:01:01.11

 Welcome to OpenVMS (TM) VAX Operating System, Version V7.3

After I login <file attached>



On Mon, Nov 4, 2013 at 6:30 PM, Mark Pizzolato - Info Comm <
Mark at infocomm.com> wrote:

> Hi Priya,
>
>
>
> I was looking for the output of “SHOW VERSION” from the “sim> “ prompt.
> The “SHOW VERSION” output from the “>>> “ prompt is the version of the VAX
> console ROM.  The “sim>” Version information describes the simulator’s
> capabilities.
>
>
>
> From the simulator startup message I can see you’re running simh V3.9.
>
>
>
> Please download and build the source from
> https://github.com/simh/simh/archive/master.zip
>
>
>
> You should just be able to unzip the file and build the vax simulator with
> “make vax”.
>
>
>
> The “messages you get when you run the simulator” include an error
> message.  It would be useful to see what command caused that error.  To do
> so you can invoke the simulator with the “-v” command switch.
>
>
>
> If this doesn’t help, then the output produced when you invoked the “make
> vax” command to build the simulator will be useful.
>
>
>
> -          Mark
>
>
>
> *From:* priya chincholikar [mailto:priyachinc at gmail.com]
> *Sent:* Monday, November 04, 2013 4:50 AM
> *To:* Mark Pizzolato - Info Comm
> *Cc:* Lennert Van Alboom; simh at trailing-edge.com
> *Subject:* Re: [Simh] Unable to telnet to other hosts
>
>
>
> I'm using fedora 18 as the host.
>
> *This is the message i get when i run the simulator :*
>
>
>
> VAX simulator V3.9-0
>
> NVR: buffering file in memory
>
> RQ: unit is read only
>
> /usr/local/vax/bin/vax.ini> attach XQ em1
>
> Command not allowed
>
>
>
>
>
> KA655-B V5.3, VMB 2.7
>
> Performing normal system tests.
>
> 40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
>
> 24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
>
> 08..07..06..05..04..03..
>
> Tests completed.
>
> Loading system software.
>
> (BOOT/R5:0 EXIT
>
>
>
>
>
>
>
>   2..
>
> ?41 DEVASSIGN, EXIT
>
> ?06 HLT INST
>
>         PC = 00000C1A
>
> Failure.
>
> >>>show version
>
> KA655-B V5.3, VMB 2.7
>
>
>
> *This is the vax.ini file :*
>
>
>
> ;
>
> ; Load CPU microcode
>
> load -r /usr/local/vax/data/ka655x.bin
>
> ;
>
> ; Attach non-volatile RAM to a file
>
> attach nvr /usr/local/vax/data/nvram.bin
>
> ;
>
> ; This virtual machine has 64M memory
>
> set cpu 64m
>
> ;
>
> ; Define disk drive types. RA92 is largest-supported VAX drive.
>
> set rq0 ra92
>
> set rq1 ra92
>
> set rq2 ra92
>
> set rq3 cdrom
>
> ;
>
> ; Attach defined drives to local files
>
> attach rq0 /usr/local/vax/data/d0.dsk
>
> attach rq1 /usr/local/vax/data/d1.dsk
>
> attach rq2 /usr/local/vax/data/d2.dsk
>
> ;
>
> ; Attach the CD-ROM to its file (read-only)
>
> attach -r rq3 /usr/local/vax/data/cd.iso
>
> ;
>
> ; Disable unused devices. It's also possible to disable individual devices,
>
> ; using a construction like "set rq2 disable" if desired.
>
> ;
>
> set rl disable
>
> set ts disable
>
> ;
>
> ; Attach Ethernet to a network interface
>
> set XQ mac=08-00-2B-AC-AC-B1
>
> set XQ type=DELQA
>
> attach XQ em1
>
> ;
>
> ;Uncomment the line below to enable auto-boot
>
> dep bdr 0
>
> ;
>
> ;Choose one of the following lines.SET CPU CONHALT returns control to the
>
> ; VAX console monitor on a halt event (where behavior will be further
>
> ; determined by whether auto-boot is set--see above. SET CPU SIMHALT will
>
> ; cause the simulator to get control instead.
>
> set cpu conhalt
>
> ;set cpu simhalt
>
> ;
>
> ;Now start the emulator
>
> boot cpu
>
> ;
>
> ; Exit the simulator
>
> exit
>
>
>
> Regards,
>
> Priya
>
>
>
> On Mon, Nov 4, 2013 at 6:02 PM, Mark Pizzolato - Info Comm <
> Mark at infocomm.com> wrote:
>
> On Monday, November 04, 2013 at 4:29 AM, Lennert Van Alboom wrote:
> > The output you sent seems to indicate that your problem isn't with
> telnet,
> > but with the guest not having networking at all (configuring the network
> > inside simh alone doesn't do much).
> >
> > What host OS are you doing this on?
> > What does your host networking stack look like?
> > Can you show your simh configuration file?
>
> Also include the output of SHOW VERSION from within the simulator you are
> using...
>
>
> > Regards,
> >
> >
> > Lennert
> >
> >
> > On Mon, Nov 04, 2013 at 05:20:34PM +0530, priya chincholikar wrote:
> > >    Hi,
> > >    I'm new to openvms and simh. I installed open vms 7.3 and have
> > configured
> > >    tcpip too.
> > >    I want to connect to other hosts to test my tcpip.
> > >    $ telnet 192.168.0.37
> > >    %TELNET-E-IVHOST, Invalid or unknown host 192.168.0.37
> > >    -TCPIP-E-NO_RECOVERY, unexpected name server failure
> > >    $ ucx
> > >    TCPIP>  ping 192.168.0.37
> > >    PING 192.168.0.37 (192.168.0.37): 56 data bytes
> > >    ----192.168.0.37 PING Statistics----
> > >    4 packets transmitted, 0 packets received, 100% packet loss
> > >    %SYSTEM-F-TIMEOUT, device timeout
> > >    I'm not able to understand where I went wrong.
> > >    Thanks,
> > >    Priya
> >
> > > _______________________________________________
> > > Simh mailing list
> > > Simh at trailing-edge.com
> > > http://mailman.trailing-edge.com/mailman/listinfo/simh
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20131104/b3b9dce5/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: telnet 1.JPG
Type: image/jpeg
Size: 78385 bytes
Desc: not available
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20131104/b3b9dce5/attachment-0002.jpe>