[Simh] PDP-10 simulator with DMR/KDP support?
Larry Baker
baker at usgs.gov
Fri Jun 7 18:24:04 EDT 2013
On 7 Jun 2013, at 2:58 PM, <simh-request at trailing-edge.com> <simh-request at trailing-edge.com> wrote:
> ------------------------------
>
> Message: 2
> Date: Fri, 07 Jun 2013 17:58:40 -0400
> From: Timothe Litt <litt at ieee.org>
> To: Mark Pizzolato - Info Comm <Mark at infocomm.com>,
> "simh at trailing-edge.com" <simh at trailing-edge.com>
> Subject: Re: [Simh] PDP-10 simulator with DMR/KDP support?
> Message-ID: <51B25790.50804 at ieee.org>
> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
>
>>> I don't think the DUP11 was ever a supported device on VMS.
>
> Yes, it was. See http://h71000.www7.hp.com/doc/spddecnetplusvax73.pdf
> page 13 table 2. DUP wasn't added in 7.3; it would have been there all
> along. This was just the first SPD I grabbed. There were also sync
> line adapters for Microvax - I have one here, I think. DSW4{1,2,3}.
> And QBus (DPV/DSV, BI (DMB/DSB). Gory details in the SPD.
>
> You needed the WAN Drivers layered product, though.
>> The DUP11 is supported on a VAXBI system fitted
>> with a DWBUA UNIBUS adapter for VAX 8200, VAX
>> 8250, VAX 8300, VAX 8300, VAX 8350, VAX 8500,
>> VAX 8530, VAX 8550, VAX 8700, and VAX 8800 systems only
>
> (Oddly, I didn't see DMC/DMR listed, but I do remember them working...)
>
We ran DMRs between our VAX-11/780 and PDP-11/70 RSX-11M-Plus -- predating DECnet Phase IV. (Wasn't Phase IV the first release that supported Ethernet?) I remember doing poor-man's routing from the VAX through the 11/70 to an LSI-11/23 in a lab (over a DZ-11 async serial line!).
My recollection is that DECnet always used DDCMP over serial lines. I thought the DMR did the DDCMP protocol in hardware. Maybe DMZ's too?
> Yes, Phase V supported DDCMP as a transport layer. No version change.
Larry Baker
US Geological Survey
650-329-5608
baker at usgs.gov
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.trailing-edge.com/pipermail/simh/attachments/20130607/cd6e3ab6/attachment-0002.html>
More information about the Simh
mailing list