[Simh] EXT : Unable to connect to ethernet

[Robert F. Thomas]

I thought that I had.  I did make many attempts.  The host system adapter's
MAC address was specified as the XQ0 MAC address, etc.

Sincerely,
Robert F. Thomas

 355 Providence Highway 
Westwood, MA USA 02090
(  Office Phone - (781) 329-9200
* mail to: rft at asthomas.com
 
-----Original Message-----
From: Hittner, David T (IS) [mailto:david.hittner at ngc.com] 
Sent: Monday, May 16, 2011 3:40 PM
To: Robert F. Thomas; simh at trailing-edge.com
Subject: RE: EXT :[Simh] Unable to connect to ethernet

You need to *carefully* read the SIMH FAQ section regarding wireless
Ethernet.

SIMH wireless networking is a lot harder to configure correctly than wired
Ethernet because it just "looks like" Ethernet, and because many wireless
routers suppress "unregistered" simulated MAC addresses to control
bandwidth.

Dave Hittner

-----Original Message-----
From: simh-bounces at trailing-edge.com [mailto:simh-bounces at trailing-edge.com]
On Behalf Of Robert F. Thomas
Sent: Monday, May 16, 2011 3:04 PM
To: simh at trailing-edge.com
Subject: EXT :[Simh] Unable to connect to ethernet

I omitted vax.inc:

set rq0 ra90
set rq1 cdrom
att rq0 vms.dsk
att rq1 vax071.iso
att xq0 eth1
set cpu 128M

Sincerely,
Robert F. Thomas

 355 Providence Highway 
Westwood, MA USA 02090
(  Office Phone - (781) 329-9200
* mail to: rft at asthomas.com
 


_______________________________________________
Simh mailing list
Simh at trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh