[Simh] Unable to connect to ethernet
Robert F. Thomas
rft at asthomas.com
Mon May 16 15:01:07 EDT 2011
We have downloaded SIMH and installed the latest version of WinPCAP on my Windows-7 SP1 Laptop.
Vax.exe has administrator priviledges. VMS and UCX loaded and installed with no errors.
We do not need nor expect to communicate with the host system. Our goal is to be able to set-up a VAXCLUSTER with our AXP and Itanium systems to allow running some legacy applications that do not VEST and for which we don't have full sources.
We don't know what we could have done wrong.
I only have WIFI access. I have installed OpenVMS 7.1, Decnet-OSI, and UCX. The following is the information from my SIMH process:
VAX simulator V3.8-1
sim> sho ver
VAX simulator V3.8-1 [64b data, 64b addresses, Ethernet support]
sim> do vax.inc
Eth: opened \Device\NPF_{78D9B57B-0DF9-4F84-9674-1845464AE9AF}
sim> show xq eth
ETH devices:
0 \Device\NPF_{A19DE824-22E0-4638-B6B1-88510E3BEE54} (Wireless Network Connec
tion)
1 \Device\NPF_{78D9B57B-0DF9-4F84-9674-1845464AE9AF} (Wireless Network Connec
tion 2)
2 \Device\NPF_{566C68BD-E821-4984-9078-AB1A754B142D} (Local Area Connection)
3 \Device\NPF_{514496A3-2966-41ED-962A-D6238420BAD9} (PdaNet Broadband Connec
tion)
4 \Device\NPF_{DA727049-0F13-4C19-A8BE-674282C273EB} (Network Connect Adapter
)
sim> boo cpu
Loading boot code from ka655x.bin
←[c
KA655X-A V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
08..07..06..05..04..03..
Tests completed.
>>>boo dua0
(BOOT/R5:0 DUA0
2..
-DUA0
1..0..
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
YSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
OpenVMS (TM) VAX Version V7.1 Major version id = 1 Minor version id = 0
ECnet-I-LOADED, network base image loaded, version = 05.0C.00
♥♦
$! Copyright (c) 1996 Digital Equipment Corporation. All rights reserved.
%STDRV-I-STARTUP, OpenVMS startup begun at 16-MAY-2011 14:48:28.88
%DCL-S-SPAWNED, process SYSTEM_1 spawned
%%%%%%%%%%% OPCOM 16-MAY-2011 14:48:38.57 %%%%%%%%%%%
Operator _ASTC02$OPA0: has been enabled, username SYSTEM
.
.
.
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 16-MAY-2011 14:49:19.68
Accounting information:
Buffered I/O count: 2634 Peak working set size: 1033
Direct I/O count: 808 Peak page file size: 33156
Page faults: 33452 Mounted volumes: 0
Charged CPU time: 0 00:00:35.94 Elapsed time: 0 00:00:50.98
After login we start UCX:
$ @ucx$startup
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:33.66 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet Loaded
%RUN-S-PROC_ID, identification of created process is 00000215
The Internet driver and ACP were successfully loaded.
%UCX-I-SETLOCAL, Setting domain and/or local host
%UCX-I-SETPROTP, Setting protocol parameters
%UCX-I-STARTCOMM, Starting communication
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:34.31 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet Started
%UCX-I-DEFINTE, Defining interfaces
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:34.32 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet ACP Created INTERnet interface: QE0
%UCX-I-ENABSERV, Enabling services
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:34.41 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet ACP Activate FTP Server
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:34.42 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet ACP Activate REXEC Server
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:34.44 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet ACP Remote Terminal Services START - RLOGIN
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:34.44 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet ACP Activate RLOGIN Server
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:34.46 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet ACP Activate RSH Server
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:34.47 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet ACP Remote Terminal Services START - TELNET
%%%%%%%%%%% OPCOM 16-MAY-2011 14:52:34.47 %%%%%%%%%%%
Message from user INTERnet on ASTC02
INTERnet ACP Activate TELNET Server
%UCX-I-STARTNAME, Starting name_service
%UCX-I-LOADSERV, Loading UCX Server proxy information
%UCX-I-SERVLOADED, UCX Aux. Server loaded with 0 proxy records
-UCX-I-SERVSKIP, Skipped 0 communication proxy records
-UCX-I-SERVTOTAL, Total of 0 proxy records read
$ ucx
UCX> show interface
Packets
Interface IP_Addr Network mask Receive Send MTU
QE0 192.48.157.2 255.255.255.0 84 4 1500
LO0 127.0.0.1 255.0.0.0 0 0 65535
UCX> ping 192.48.157.2
%UCX-I-LOOPACT, 192.48.157.2 is alive
UCX> ping 192.48.157.9
%UCX-I-LOOPINACT, 192.48.157.9 does not respond
UCX> sho interface qe0 /full
Interface: QE0
IP_Addr: 192.48.157.2 NETWRK: 255.255.255.0 BRDCST: 192.48.157.255
Ethernet_Addr: AA-00-04-00-02-04 MTU: 1500
Flags: UP BRDCST NOTRL RUN
RECEIVE SEND
Packets 242 24
IP packets 2 0
Broadcast IP packets 136 0
Trailer 1 IP packets 0
Trailer 2 IP packets 0
ARP packets 0 0
Broadcast ARP packets 104 24
Drops
IP packets 0 0
ARP packets 0 0
Errors
Hardware 0 0
Software 0 0
Restarting attempts 0
Successful restarts 0
UCX>
Sincerely,
Robert F. Thomas
355 Providence Highway
Westwood, MA USA 02090
( Office Phone - (781) 329-9200
* mail to: rft at asthomas.com
More information about the Simh
mailing list